{"title":"3D Printed Cycle Mounts \u0026 Accessories","description":"Designed and Manufactured in the UK","products":[{"product_id":"magcad-hammerhead-karoo-3-specialized-mount","title":"MagCAD Hammerhead Karoo 3 Specialized Mount","description":"\u003cp\u003eMount your Hammerhead Karoo 2 or Karoo 3 in front of your Specialized handlebars with this MagCAD Mount.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed mount.\u003c\/li\u003e\n\u003cli\u003e1x M4x16mm cap screw.\u003c\/li\u003e\n\u003cli\u003e1x M4 retained nut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Hammerhead device and Specialized stem pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Hammerhead Karoo 2 or Karoo 3 cycle computer in front of your Specialized handlebars with this MagCAD Mount. The new Specialized stems found on bikes such as the Venge, Roubaix, Tarmac and Diverge (as well as others) come with a slot in the centre that provides a secure point to attach the mount.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eFitting the MagCAD mount is a simple process. Simply bolt through your Specialized stem faceplate into the retained nut and rotate the mount to your preferred orientation.\u003c\/p\u003e\n\u003cp\u003eTo attach your Hammerhead device simply follow the same procedure as with the OEM Hammerhead mount, pulling the device backward onto the mount with a slight twist to centre and locate it. You should here a positive click when the device is attached. We recommend using the tether that's supplied with your Hammerhead device just for extra security.\u003c\/p\u003e\n\u003ch5\u003eRoval Alpinist Cockpit\u003c\/h5\u003e\n\u003cp\u003eFor the Roval Alpinist integrated cockpit please see our \u003ca title=\"MagCAD Hammerhead Karoo 2 Roval Alpinist Mount\" href=\"https:\/\/www.magcad-designs.com\/products\/magcad-hammerhead-karoo-2-roval-alpinist-mount\"\u003eMagCAD Hammerhead Karoo 2 Roval Alpinist Mount\u003c\/a\u003e, designed specifically for the Roval handlebars.\u003c\/p\u003e\n\u003cp\u003eThis MagCAD Hammerhead Karoo 3 Specialized mount will attach to the Roval Alpinist handlebars. However, the contacting face is subtly different to the curve of the Roval bars and you will need a longer cap screw than supplied with the mount to ensure full thread engagement.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHammerhead Karoo 2 \u0026amp; Karoo 3.\u003c\/li\u003e\n\u003cli\u003eSpecialized stems: Venge, Tarmac SL7, Future.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 21 grams (without hardware), 24 grams (with hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with SRAM LLC, Specialized Bicycle Components Inc, or their products and services. Hammerhead (SRAM LLC), Specialized and their respective logos are trademarks or registered trademarks of SRAM LLC and Specialized Bicycle Components Inc.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39729558323254,"sku":"107910","price":20.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39729558356022,"sku":"107911","price":20.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39729558388790,"sku":"107912","price":20.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39729558421558,"sku":"107913","price":20.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39764128038966,"sku":"107915","price":20.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_5245.jpg?v=1752146472"},{"product_id":"magcad-garmin-specialized-mount","title":"MagCAD Garmin Specialized Mount","description":"\u003cp\u003eMount your Garmin Edge computer in front of your Specialized handlebars with this MagCAD Mount.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed mount.\u003c\/li\u003e\n\u003cli\u003e1x M4x16mm cap screw.\u003c\/li\u003e\n\u003cli\u003e1x M4 retained nut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Garmin device and Specialized stem pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Garmin Edge computer in front of your Specialized handlebars with this MagCAD Mount. The new Specialized stems found on bikes such as the Venge, Roubaix, Tarmac and Diverge (as well as others) come with a slot in the centre that provides a secure point to attach the mount.\u003c\/p\u003e\n\u003cp\u003eThe MagCAD Garmin Specialized Mount is designed to suit Garmin Edge devices up to the size of the 840. It is extremely strong and stiff, keeping your device securely positioned in front of your stem. There is a longer version of this mount designed specifically for the Garmin 1040 \u0026amp; 1050.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eFitting the MagCAD mount is a simple process.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove your Specialized stem faceplate and insert the supplied retained nut in the back of the faceplate, holding it horizontally.\u003c\/li\u003e\n\u003cli\u003eScrew the MagCAD mount through the front of the faceplate, through the slot and into the retained nut. We recommend using a thread locking compound before installing the screw. Loosely tighten the screw.\u003c\/li\u003e\n\u003cli\u003eReassemble the stem faceplate to your Specialized stem, carefully following the manufacturers instructions and ensure the retained nut and screw do not foul your handlebars.\u003c\/li\u003e\n\u003cli\u003ePivot the mount to your preferred orientation and tighten to 2.7Nm.\u003c\/li\u003e\n\u003cli\u003ePeriodically check the screw remains tight and secure.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAll Garmin Edge devices come with a lanyard for extra security. We recommend using this lanyard alongside our MagCAD mount to avoid any risk of damage due to incorrect assembly or mis-use.\u003c\/p\u003e\n\u003ch5\u003eRoval Alpinist Cockpit\u003c\/h5\u003e\n\u003cp\u003eThis mount is not intended to be used with the Roval Alpinist or Roval Rapide integrated cockpit. These one-piece carbon cockpits are not to be confused with the separate Roval handlebars.\u003c\/p\u003e\n\u003cp\u003eFor the Roval Alpinist integrated cockpit please see our \u003ca href=\"https:\/\/www.magcad-designs.com\/products\/magcad-garmin-roval-alpinist-mount\" title=\"MagCAD Garmin Roval Alpinist Mount\"\u003eMagCAD Garmin Roval Alpinist Mount\u003c\/a\u003e. For the Roval Rapide integrated cockpit please see our \u003ca href=\"https:\/\/www.magcad-designs.com\/products\/magcad-garmin-roval-rapide-mount\" title=\"MagCAD Garmin Roval Rapide Mount\"\u003eMagCAD Garmin Roval Rapide Mount\u003c\/a\u003e. Each mount is designed specifically for the corresponding cockpit.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eGarmin Edge devices (small\/medium): 130 Plus, 540, 840.\u003c\/li\u003e\n\u003cli\u003eSpecialized stems: Venge, Tarmac SL7, Future.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 12 grams (without hardware), 16 grams ( with hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Specialized Bicycle Components Inc, Garmin Ltd, or their products and services. Specialized, Garmin and their respective logos are trademarks or registered trademarks of Specialized Bicycle Components Inc and Garmin Ltd.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39750347948086,"sku":"104210","price":20.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39750347980854,"sku":"104211","price":20.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39750348013622,"sku":"104212","price":20.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39750348046390,"sku":"104213","price":20.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39751654342710,"sku":"104215","price":20.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_3856.jpg?v=1635591515"},{"product_id":"magcad-wahoo-elemnt-bolt-specialized-mount","title":"MagCAD Wahoo Elemnt Bolt Specialized Mount","description":"\u003cp\u003eMount your Wahoo Elemnt Bolt (V1) cycle computer in front of your Specialized handlebars with this MagCAD Mount.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount, 1x M4x16mm cap screw, 1x M4 retained nut.\u003c\/p\u003e\n\u003cp\u003eThe Wahoo device and Specialized stem pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Wahoo Bolt (V1) computer in front of your Specialized handlebars with this MagCAD Mount. The new Specialized stems found on bikes such as the Venge, Roubaix, Tarmac and Diverge (as well as others) come with a slot in the centre that provides a secure point to attach the mount.\u003c\/p\u003e\n\u003cp\u003eThe MagCAD Wahoo Elemnt Bolt Specialized Mount is designed specifically for the shape of the Bolt (V1). It is extremely strong and stiff, keeping your device securely positioned in front of your stem.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eFitting the MagCAD mount is a simple process. Simply bolt through your Specialized stem faceplate into the retained nut and rotate the mount to your preferred orientation.\u003c\/p\u003e\n\u003ch5\u003eRoval Alpinist Cockpit\u003c\/h5\u003e\n\u003cp\u003eThe MagCAD Specialized mount will attach to the Roval Alpinist handlebars. However, the contacting face is subtly different to the curve of the Roval bars and you will need a longer cap screw than supplied with the mount to ensure full thread engagement.\u003c\/p\u003e\n\u003cp\u003ePlease contact us when placing an order if you would like us to include the longer M4x20mm cap screw. Otherwise these are easy to source locally yourself.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt Bolt (V1) - Sold between March 2017 - April 2021.\u003c\/li\u003e\n\u003cli\u003eSpecialized stems: Venge, Tarmac SL7, Future.\u003c\/li\u003e\n\u003cli\u003eRoval Alpinist integrated handlebars \u0026amp; stem - See note above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 11 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39750348701750,"sku":"103410","price":21.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39750348734518,"sku":"103411","price":21.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39750348767286,"sku":"103412","price":21.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39750348800054,"sku":"103413","price":21.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39764138328118,"sku":"103415","price":21.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_2571.jpg?v=1635591702"},{"product_id":"magcad-wahoo-elemnt-roam-specialized-mount","title":"MagCAD Wahoo Elemnt Roam Specialized Mount","description":"\u003cp\u003eMount your Wahoo Elemnt Roam V1 or V2 cycle computer in front of your Specialized handlebars with this MagCAD Mount.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount, 1x M4x16mm cap screw, 1x M4 retained nut.\u003c\/p\u003e\n\u003cp\u003eThe Wahoo device and Specialized stem pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Wahoo Roam V1 or V2 computer in front of your Specialized handlebars with this MagCAD Mount. The new Specialized stems found on bikes such as the Venge, Roubaix, Tarmac and Diverge (as well as others) come with a slot in the centre that provides a secure point to attach the mount.\u003c\/p\u003e\n\u003cp\u003eThe MagCAD Wahoo Elemnt Roam Specialized Mount is designed specifically for the shape of the Roam. It is extremely strong and stiff, keeping your device securely positioned in front of your stem.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eFitting the MagCAD mount is a simple process. Simply bolt through your Specialized stem faceplate into the retained nut and rotate the mount to your preferred orientation.\u003c\/p\u003e\n\u003ch5\u003eRoval Alpinist Cockpit\u003c\/h5\u003e\n\u003cp\u003eFor the Roval Alpinist integrated cockpit please see our \u003ca title=\"MagCAD Wahoo Elemnt Roam Roval Alpinist Mount\" href=\"https:\/\/www.magcad-designs.com\/products\/magcad-garmin-roval-alpinist-mount\" data-mce-href=\"https:\/\/www.magcad-designs.com\/products\/magcad-garmin-roval-alpinist-mount\"\u003eMagCAD Wahoo Elemnt Roam Roval Alpinist Mount\u003c\/a\u003e, designed specifically for the Roval handlebars.\u003c\/p\u003e\n\u003cp\u003eThis MagCAD Wahoo Elemnt Roam Specialized mount will attach to the Roval Alpinist handlebars. However, the contacting face is subtly different to the curve of the Roval bars and you will need a longer cap screw than supplied with the mount to ensure full thread engagement.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt Roam V1 and V2.\u003c\/li\u003e\n\u003cli\u003eSpecialized stems: Venge, Tarmac SL7, Future.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 17 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39750349029430,"sku":"103510","price":28.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39750349062198,"sku":"103511","price":28.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39750349094966,"sku":"103512","price":28.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39750349127734,"sku":"103513","price":28.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39764163887158,"sku":"103515","price":28.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_2588.jpg?v=1649439674"},{"product_id":"garmin-watch-mount","title":"MagCAD Garmin Watch Mount","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x MagCAD 3D Print Mount, 2x Watch Pins, 1x Silicone Strap.\u003c\/p\u003e\n\u003cp\u003eFully assembled and ready to use.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eFor cyclists who also run but don't want to purchase multiple Garmin devices, this MagCAD mount allows you to mount your Garmin Edge cycle computer to your wrist, just like a Garmin Forerunner.\u003c\/p\u003e\n\u003cp\u003eIt allows Triathletes to continue recording their workout seamlessly when they swap between disciplines. Or those competing in Cyclo-cross to swap between bikes without having to remove your computer each time.\u003c\/p\u003e\n\u003cp\u003eThis version of mount will position your Garmin Edge perpendicular to your forearm, just like a normal watch. We have a version that turns your Garmin 90 degrees so it is in-line with your forearm, especially useful for Time Triallists who want to see their device whilst in the TT position.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eThe Garmin Edge mount is 3D printed and assembled with a silicone watch strap before being shipped out. Simply attach your Garmin device with a quarter-turn motion and strap to your wrist. Ready to go!\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAll Garmin Edge devices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 24 grams (including strap and pins).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black\/Red","offer_id":39753657155638,"sku":"101130","price":18.99,"currency_code":"GBP","in_stock":true},{"title":"Black\/White","offer_id":39753657188406,"sku":"101133","price":18.99,"currency_code":"GBP","in_stock":false},{"title":"Black\/Pink","offer_id":39753678848054,"sku":"101132","price":18.99,"currency_code":"GBP","in_stock":false},{"title":"Black\/Grey","offer_id":39753691791414,"sku":"101138","price":18.99,"currency_code":"GBP","in_stock":false},{"title":"Black\/Green","offer_id":39753691824182,"sku":"101136","price":18.99,"currency_code":"GBP","in_stock":false},{"title":"Black\/Fluo Yellow","offer_id":39753691856950,"sku":"101135","price":18.99,"currency_code":"GBP","in_stock":true},{"title":"Black\/Blue","offer_id":39753714958390,"sku":"101134","price":18.99,"currency_code":"GBP","in_stock":false},{"title":"Black\/Yellow","offer_id":39753715056694,"sku":"101137","price":18.99,"currency_code":"GBP","in_stock":false},{"title":"Blue\/White","offer_id":39753714991158,"sku":"101139","price":18.99,"currency_code":"GBP","in_stock":true},{"title":"Pink\/White","offer_id":39753715023926,"sku":"101140","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/files\/Garmin_Watch_Mount_Black_Red_271224_2.jpg?v=1735304421"},{"product_id":"wahoo-elemnt-bolt-v2-blendr-bmc-mount-short","title":"MagCAD Wahoo Elemnt Bolt V2 Blendr\/BMC Mount - Short","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Wahoo Elemnt Bolt (V2) in front of your handlebars with Bontrager's Blendr or BMC's ICS stem mount systems. Both the Blendr and BMC mounting systems are based on the GoPro standard. Therefore this mount will be compatible with many more similar mounting systems.\u003c\/p\u003e\n\u003cp\u003eThis short version mount weighs just 10 grams (without hardware) and positions your device just in front of your handlebars.\u003c\/p\u003e\n\u003cp\u003ePlease note: This mount is only compatible with the Bolt (V2). It is not compatible with the Bolt (V1) launched March 2017 or the Bolt (V3) launched May 2025. It is also not compatible with other Elemnt computers like the Roam or Ace. For other Wahoo computers we have model specific mounts.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attach to the lug on your Blendr\/BMC mount and rotate the Wahoo unit to your preferred orientation. Carbon grit paste can be used to increase assembly grip.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt Bolt (V2) - New for May 2021, featuring a colour screen and slightly larger size compared with the Bolt (V1).\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Wahoo; Mini, Elemnt, Bolt (V1 \u0026amp; 3), Roam (V1, 2 \u0026amp; 3), Ace.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 10 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Trek Bicycle Corporation (Bontrager), BMC Bicycles, Wahoo Fitness, LLC, or their products and services. Bontrager, BMC, Wahoo and their respective logos are trademarks or registered trademarks of Trek Bicycle Corporation (Bontrager), BMC Bicycles and Wahoo Fitness, LLC.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39764039893046,"sku":"106010","price":20.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39764039925814,"sku":"106011","price":20.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39764039958582,"sku":"106012","price":20.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39764039991350,"sku":"106013","price":20.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39764040024118,"sku":"106015","price":20.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_4633.jpg?v=1636479153"},{"product_id":"magcad-wahoo-elemnt-bolt-v2-specialized-mount","title":"MagCAD Wahoo Elemnt Bolt V2 Specialized Mount","description":"\u003cp\u003eMount your Wahoo Elemnt Bolt (V2) cycle computer in front of your Specialized handlebars with this MagCAD Mount.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount, 1x M4x16mm cap screw, 1x M4 retained nut.\u003c\/p\u003e\n\u003cp\u003eThe Wahoo device and Specialized stem pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Wahoo Bolt (V2) computer in front of your Specialized handlebars with this MagCAD Mount. The new Specialized stems found on bikes such as the Venge, Roubaix, Tarmac and Diverge (as well as others) come with a slot in the centre that provides a secure point to attach the mount.\u003c\/p\u003e\n\u003cp\u003eThe MagCAD Wahoo Elemnt Bolt V2 Specialized Mount is designed specifically for the shape of the Bolt (V2). It is extremely strong and stiff, keeping your device securely positioned in front of your stem.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eFitting the MagCAD mount is a simple process. Simply bolt through your Specialized stem faceplate into the retained nut and rotate the mount to your preferred orientation.\u003c\/p\u003e\n\u003ch5\u003eRoval Alpinist Cockpit\u003c\/h5\u003e\n\u003cp\u003eFor the Roval Alpinist integrated cockpit please see our \u003ca href=\"https:\/\/www.magcad-designs.com\/products\/magcad-wahoo-elemnt-bolt-v2-roval-alpinist-mount\" title=\"MagCAD Wahoo Elemnt Bolt V2 Roval Alpinst Mount\"\u003eMagCAD Wahoo Elemnt Bolt V2 Roval Alpinist Mount\u003c\/a\u003e, designed specifically for the Roval handlebars.\u003c\/p\u003e\n\u003cp\u003eThis MagCAD Wahoo Elemnt Bolt V2 Specialized mount will attach to the Roval Alpinist handlebars. However, the contacting face is subtly different to the curve of the Roval bars and you will need a longer cap screw than supplied with the mount to ensure full thread engagement.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt Bolt (V2) - New for May 2021, featuring a colour screen and slightly larger size compared with the Bolt (V1).\u003c\/li\u003e\n\u003cli\u003eSpecialized stems: Venge, Tarmac SL7, Future.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 12 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39764164902966,"sku":"105910","price":22.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39764164935734,"sku":"105911","price":22.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39764164968502,"sku":"105912","price":22.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39764165001270,"sku":"105913","price":22.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39764165034038,"sku":"105915","price":22.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_4623.jpg?v=1636488226"},{"product_id":"magcad-garmin-1050-specialized-mount","title":"MagCAD Garmin 1050 Specialized Mount","description":"\u003cp\u003eMount your Garmin Edge 1050\/1040 computer in front of your Specialized handlebars with this MagCAD Mount.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed mount.\u003c\/li\u003e\n\u003cli\u003e1x M4x16mm cap screw.\u003c\/li\u003e\n\u003cli\u003e1x M4 retained nut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Garmin device and Specialized stem pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Garmin Edge 1050 or 1040 computer in front of your Specialized handlebars with this MagCAD Mount. The new Specialized stems found on bikes such as the Venge, Roubaix, Tarmac and Diverge (as well as others) come with a slot in the centre that provides a secure point to attach the mount.\u003c\/p\u003e\n\u003cp\u003eThis design has been subtly modified, now 7mm longer than the previous 1040 version, to suit the new Garmin Edge 1050. It remains compatible with all other Garmin Edge devices. Please note there is a shorter version of this mount designed for the smaller Garmin Edge devices.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eFitting the MagCAD mount is a simple process.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove your Specialized stem faceplate and insert the supplied retained nut in the back of the faceplate, holding it horizontally.\u003c\/li\u003e\n\u003cli\u003eScrew the MagCAD mount through the front of the faceplate, through the slot and into the retained nut. We recommend using a thread locking compound before installing the screw. Loosely tighten the screw.\u003c\/li\u003e\n\u003cli\u003eReassemble the stem faceplate to your Specialized stem, carefully following the manufacturers instructions and ensure the retained nut and screw do not foul your handlebars.\u003c\/li\u003e\n\u003cli\u003ePivot the mount to your preferred orientation and tighten to 2.7Nm.\u003c\/li\u003e\n\u003cli\u003ePeriodically check the screw remains tight and secure.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAll Garmin Edge devices come with a lanyard for extra security. We recommend using this lanyard alongside our MagCAD mount to avoid any risk of damage due to incorrect assembly or mis-use.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAll Garmin Edge devices including the new Garmin Edge 1050.\u003c\/li\u003e\n\u003cli\u003eSpecialized stems: Venge, Tarmac SL7, Tarmac SL8, Future.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 17 grams (without hardware), 20 grams (with hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Specialized Bicycle Components Inc, Garmin Ltd, or their products and services. Specialized, Garmin and their respective logos are trademarks or registered trademarks of Specialized Bicycle Components Inc and Garmin Ltd.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39765029126198,"sku":"104310","price":24.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39765029158966,"sku":"104311","price":24.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39765029191734,"sku":"104312","price":24.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39765029224502,"sku":"104313","price":24.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39765029257270,"sku":"104315","price":24.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_3862.jpg?v=1636539731"},{"product_id":"magcad-wahoo-elemnt-specialized-mount","title":"MagCAD Wahoo Elemnt Specialized Mount","description":"\u003cp\u003eMount your Wahoo Elemnt cycle computer in front of your Specialized handlebars with this MagCAD Mount.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount, 1x M4x16mm cap screw, 1x M4 retained nut.\u003c\/p\u003e\n\u003cp\u003eThe Wahoo device and Specialized stem pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Wahoo Elemnt computer in front of your Specialized handlebars with this MagCAD Mount. The new Specialized stems found on bikes such as the Venge, Roubaix, Tarmac and Diverge (as well as others) come with a slot in the centre that provides a secure point to attach the mount.\u003c\/p\u003e\n\u003cp\u003eThe MagCAD Wahoo Elemnt Specialized Mount is designed for the original larger Wahoo Elemnt device but is compatible with all Wahoo Elemnt devices; Mini, Bolt (V1), Bolt (V2) \u0026amp; Roam. It is extremely strong and stiff, keeping your device securely positioned in front of your stem.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eFitting the MagCAD mount is a simple process. Simply bolt through your Specialized stem faceplate into the retained nut and rotate the mount to your preferred orientation.\u003c\/p\u003e\n\u003ch5\u003eRoval Alpinist Cockpit\u003c\/h5\u003e\n\u003cp\u003eThe MagCAD Specialized mount will attach to the Roval Alpinist handlebars. However, the contacting face is subtly different to the curve of the Roval bars and you will need a longer cap screw than supplied with the mount to ensure full thread engagement.\u003c\/p\u003e\n\u003cp\u003ePlease contact us when placing an order if you would like us to include the longer M4x20mm cap screw. Otherwise these are easy to source locally yourself.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt devices; Elemnt, Mini, Bolt (V1), Bolt (V2), Roam.\u003c\/li\u003e\n\u003cli\u003eSpecialized stems: Venge, Tarmac SL7, Future.\u003c\/li\u003e\n\u003cli\u003eRoval Alpinist integrated handlebars \u0026amp; stem - See note above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 13 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39765069824054,"sku":"104410","price":21.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39765069856822,"sku":"104411","price":21.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39765069889590,"sku":"104412","price":21.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39765069922358,"sku":"104413","price":21.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39765069955126,"sku":"104415","price":21.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_3873.jpg?v=1636542869"},{"product_id":"magcad-wahoo-elemnt-bolt-gopro-specialized-mount","title":"MagCAD Wahoo Elemnt Bolt GoPro Specialized Mount","description":"\u003cp\u003eMount your Wahoo Elemnt Bolt (V1) cycle computer in front of your Specialized handlebars with this MagCAD Mount.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount, 1x M4x16mm cap screw, 1x M4 retained nut, 1x M5x20mm button head screw, 1x M5 dome nut.\u003c\/p\u003e\n\u003cp\u003eThe Wahoo device and Specialized stem pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Wahoo Bolt (V1) computer in front of your Specialized handlebars with this MagCAD Mount. The new Specialized stems found on bikes such as the Venge, Roubaix, Tarmac and Diverge (as well as others) come with a slot in the centre that provides a secure point to attach the mount.\u003c\/p\u003e\n\u003cp\u003eThe MagCAD Wahoo Elemnt Bolt Specialized Mount is designed specifically for the shape of the Bolt (V1). It is extremely strong and stiff, keeping your device securely positioned in front of your stem.\u003c\/p\u003e\n\u003cp\u003eA GoPro lug has been added underneath for maximum flexibility, allowing you to mount additional devices such as cameras and lights underneath your computer without cluttering the rest of your handlebars.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eFitting the MagCAD mount is a simple process. Simply bolt through your Specialized stem faceplate into the retained nut and rotate the mount to your preferred orientation.\u003c\/p\u003e\n\u003cp\u003ePlease Note: When mounting multiple devices off one mount we recommend using a tether just for extra security.\u003c\/p\u003e\n\u003ch5\u003eRoval Alpinist Cockpit\u003c\/h5\u003e\n\u003cp\u003eThe MagCAD Specialized mount will attach to the Roval Alpinist handlebars. However, the contacting face is subtly different to the curve of the Roval bars and you will need a longer cap screw than supplied with the mount to ensure full thread engagement.\u003c\/p\u003e\n\u003cp\u003ePlease contact us when placing an order if you would like us to include the longer M4x20mm cap screw. Otherwise these are easy to source locally yourself.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt Bolt (V1) - Sold between March 2017 - April 2021.\u003c\/li\u003e\n\u003cli\u003eAction cameras and lights with a GoPro type mount.\u003c\/li\u003e\n\u003cli\u003eSpecialized stems: Venge, Tarmac SL7, Future.\u003c\/li\u003e\n\u003cli\u003eRoval Alpinist integrated handlebars \u0026amp; stem - See note above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 13 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39765079195702,"sku":"104810","price":24.99,"currency_code":"GBP","in_stock":false},{"title":"Red","offer_id":39765079228470,"sku":"104811","price":24.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39765079261238,"sku":"104812","price":24.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39765079294006,"sku":"104813","price":24.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39765079326774,"sku":"104815","price":24.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_3878.jpg?v=1636543820"},{"product_id":"magcad-garmin-gopro-specialized-mount","title":"MagCAD Garmin GoPro Specialized Mount","description":"\u003cp\u003eMount your Garmin Edge computer in front of your Specialized handlebars with this MagCAD Mount.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed mount.\u003c\/li\u003e\n\u003cli\u003e1x M4x16mm cap screw.\u003c\/li\u003e\n\u003cli\u003e1x M4 retained nut.\u003c\/li\u003e\n\u003cli\u003e1x M5x20mm button head screw.\u003c\/li\u003e\n\u003cli\u003e1x M5 dome nut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Garmin device and Specialized stem pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Garmin Edge computer in front of your Specialized handlebars with this MagCAD Mount. The new Specialized stems found on bikes such as the Venge, Roubaix, Tarmac and Diverge (as well as others) come with a slot in the centre that provides a secure point to attach the mount.\u003c\/p\u003e\n\u003cp\u003eThis MagCAD mount is designed to suit Garmin Edge devices up to the size of the 550 and 850. It is extremely strong and stiff, keeping your device securely positioned in front of your stem. This mount will not suit the large Edge devices like the 1040 and 1050. For those we have a longer version mount.\u003c\/p\u003e\n\u003cp\u003eA GoPro lug has been added underneath for maximum flexibility, allowing you to mount additional devices such as cameras and lights underneath your computer without cluttering the rest of your handlebars.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eFitting the MagCAD mount is a simple process.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove your Specialized stem faceplate and insert the supplied retained nut in the back of the faceplate, holding it horizontally.\u003c\/li\u003e\n\u003cli\u003eScrew the MagCAD mount through the front of the faceplate, through the slot and into the retained nut. We recommend using a thread locking compound before installing the screw. Loosely tighten the screw.\u003c\/li\u003e\n\u003cli\u003eReassemble the stem faceplate to your Specialized stem, carefully following the manufacturers instructions and ensure the retained nut and screw do not foul your handlebars.\u003c\/li\u003e\n\u003cli\u003ePivot the mount to your preferred orientation and tighten to 2.7Nm.\u003c\/li\u003e\n\u003cli\u003ePeriodically check the screw remains tight and secure.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAll Garmin Edge devices come with a lanyard for extra security. We recommend using this lanyard alongside our MagCAD mount to avoid any risk of damage due to incorrect assembly or mis-use.\u003c\/p\u003e\n\u003cp\u003ePlease Note: When mounting multiple devices off one mount we recommend using a tether just for extra security.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eGarmin Edge devices (small\/medium): 130 Plus, 550, 850.\u003c\/li\u003e\n\u003cli\u003eNot compatible with Garmin Edge devices (large): Explore, 1030, 1040 \u0026amp; 1050.\u003c\/li\u003e\n\u003cli\u003eAction cameras and lights with a GoPro type mount.\u003c\/li\u003e\n\u003cli\u003eSpecialized stems: Venge, Tarmac SL7, Future.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the S-Works SL stem.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Roval integrated cockpits; Alpinist SL, Rapide \u0026amp; Alpinist II.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 15 grams (without hardware), 23 grams (with hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Specialized Bicycle Components Inc, Garmin Ltd, GoPro Inc, or their products and services. Specialized, Garmin, GoPro and their respective logos are trademarks or registered trademarks of Specialized Bicycle Components Inc, Garmin Ltd and GoPro Inc.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39765106688054,"sku":"104910","price":20.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39765106720822,"sku":"104911","price":20.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39765106753590,"sku":"104912","price":20.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39765106786358,"sku":"104913","price":20.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39765106819126,"sku":"104915","price":20.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_4143.jpg?v=1636545177"},{"product_id":"magcad-wahoo-elemnt-bolt-v2-gopro-specialized-mount","title":"MagCAD Wahoo Elemnt Bolt V2 GoPro Specialized Mount","description":"\u003cp\u003eMount your Wahoo Elemnt Bolt (V2) cycle computer in front of your Specialized handlebars with this MagCAD Mount.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount, 1x M4x16mm cap screw, 1x M4 retained nut, 1x M5x20mm button head screw, 1x M5 dome nut.\u003c\/p\u003e\n\u003cp\u003eThe Wahoo device and Specialized stem pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Wahoo Bolt (V2) computer in front of your Specialized handlebars with this MagCAD Mount. The new Specialized stems found on bikes such as the Venge, Roubaix, Tarmac and Diverge (as well as others) come with a slot in the centre that provides a secure point to attach the mount.\u003c\/p\u003e\n\u003cp\u003eThe MagCAD Wahoo Elemnt Bolt V2 Specialized Mount is designed specifically for the shape of the Bolt (V2). It is extremely strong and stiff, keeping your device securely positioned in front of your stem.\u003c\/p\u003e\n\u003cp\u003eA GoPro lug has been added underneath for maximum flexibility, allowing you to mount additional devices such as cameras and lights underneath your computer without cluttering the rest of your handlebars.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eFitting the MagCAD mount is a simple process. Simply bolt through your Specialized stem faceplate into the retained nut and rotate the mount to your preferred orientation.\u003c\/p\u003e\n\u003ch5\u003eRoval Alpinist Cockpit\u003c\/h5\u003e\n\u003cp\u003eThe MagCAD Specialized mount will attach to the Roval Alpinist handlebars. However, the contacting face is subtly different to the curve of the Roval bars and you will need a longer cap screw than supplied with the mount to ensure full thread engagement.\u003c\/p\u003e\n\u003cp\u003ePlease contact us when placing an order if you would like us to include the longer M4x20mm cap screw. Otherwise these are easy to source locally yourself.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt Bolt (V2) - New for May 2021, featuring a colour screen and slightly larger size compared with the Bolt (V1).\u003c\/li\u003e\n\u003cli\u003eAction cameras and lights with a GoPro type mount.\u003c\/li\u003e\n\u003cli\u003eSpecialized stems: Venge, Tarmac SL7, Future.\u003c\/li\u003e\n\u003cli\u003eRoval Alpinist integrated handlebars \u0026amp; stem - See note above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 15 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39765134016566,"sku":"107210","price":25.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39765134049334,"sku":"107211","price":25.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39765134082102,"sku":"107212","price":25.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39765134114870,"sku":"107213","price":25.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39765134147638,"sku":"107215","price":25.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_5144.jpg?v=1636545480"},{"product_id":"magcad-quad-lock-base-specialized-mount","title":"MagCAD Quad Lock Base Specialized Mount","description":"\u003cp\u003e3D printed mount that provides a base for you to mount a Quad Lock interface and Quad Lock phone case.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed mount.\u003c\/li\u003e\n\u003cli\u003e1x M4x16mm cap screw.\u003c\/li\u003e\n\u003cli\u003e1x M4 tee nut.\u003c\/li\u003e\n\u003cli\u003e1x M5x30mm countersunk screw.\u003c\/li\u003e\n\u003cli\u003e1x M5 Nyloc locking nut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Quad Lock interface, Quad Lock Case and Specialized stem pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eThis MagCAD mount provides a base for the Quad Lock interface (not provided), allowing you to mount your Quad Lock case and phone securely and cleanly in front of a compatible Specialized stem. The new Specialized stem faceplate comes with a slot in the centre for a retained nut that provides a secure point to attach the mount.\u003c\/p\u003e\n\u003cp\u003eThis mount is particularly useful for those with aero profiled handlebars that don't fit the standard Quad Lock handlebar clamp or for those simply looking for a really tidy and clean setup.\u003c\/p\u003e\n\u003cp\u003eThe Quad Lock interface can be purchased as part of the Quad Lock Out Front Pro Mount for bicycles or the Quad Lock Motorcycle mount.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eFitting the MagCAD mount is a simple process. Simply bolt through your Specialized stem faceplate into the retained nut and rotate the mount to your preferred orientation.\u003c\/p\u003e\n\u003cp\u003eBolt the Quad Lock interface (not provided) to the top of the mount with the M5 x 30 countersunk screw and M5 locking nut and rotate to your preferred orientation before tightening.\u003c\/p\u003e\n\u003cp\u003ePlease Note: A tether should always be used as additional security for your phone.\u003c\/p\u003e\n\u003ch5\u003eRoval Alpinist Cockpit\u003c\/h5\u003e\n\u003cp\u003eThe MagCAD Specialized mount will attach to the Roval Alpinist handlebars. However, the contacting face is subtly different to the curve of the Roval bars and you will need a longer cap screw than supplied with the mount to ensure full thread engagement.\u003c\/p\u003e\n\u003cp\u003ePlease contact us when placing an order if you would like us to include the longer M4x20mm cap screw. Otherwise these are easy to source locally yourself.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eQuad Lock interface (not included).\u003c\/li\u003e\n\u003cli\u003eSpecialized stems: Venge, Tarmac SL7, Future.\u003c\/li\u003e\n\u003cli\u003eRoval Alpinist integrated handlebars \u0026amp; stem - See note above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 25 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39765143289910,"sku":"108510","price":23.99,"currency_code":"GBP","in_stock":false},{"title":"Red","offer_id":39765143322678,"sku":"108511","price":23.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39765143355446,"sku":"108512","price":23.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39765143388214,"sku":"108513","price":23.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39765143420982,"sku":"108515","price":23.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_5512.jpg?v=1636545968"},{"product_id":"magcad-garmin-scott-creston-ic-sl-mount","title":"MagCAD Garmin Scott Creston iC SL Mount","description":"\u003cp\u003eMount your Garmin Edge computer in front of your Scott Creston iC SL handlebars with this MagCAD Mount. Not compatible with the newer Creston iC SL Aero handlebars.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed mount.\u003c\/li\u003e\n\u003cli\u003e1x M4x25mm button head screw.\u003c\/li\u003e\n\u003cli\u003e1x M4x16mm button head screw.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Garmin device and Creston handlebars pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eThis mounts uses the two existing M4 Cap Screws underneath your Scott Creston iC SL integrated handlebars to mount your Garmin Edge device. The mount holds your device in the perfect position just in front of your handlebar leading edge.\u003c\/p\u003e\n\u003cp\u003eThe MagCAD Garmin Scott Creston iC SL Mount is designed to suit Garmin Edge devices up to the size of the 540 and 840. It is extremely strong and stiff, keeping your device securely positioned in front of your stem. There is a longer version of this mount designed specifically for the Garmin 1040 and 1050.\u003c\/p\u003e\n\u003cp\u003ePlease note: This mount is not compatible with the newer Scott Creston iC SL Aero handlebars. It is only compatible with the original Creston iC SL handlebars.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attached to the underside of your Creston handlebars.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eGarmin Edge devices (small\/medium): 130 Plus, 540, 840.\u003c\/li\u003e\n\u003cli\u003eScott Creston iC SL handlebars.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Scott Creston iC SL Aero handlebars.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003eWeight: 29 grams (without hardware), 33 grams (with hardware).\u003c\/p\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Scott Sports SA, Garmin Ltd, or their products and services. Scott, Garmin, and their respective logos are trademarks or registered trademarks of Scott Sports SA and Garmin Ltd.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39765164556342,"sku":"107810","price":30.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39765164589110,"sku":"107811","price":30.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39765164621878,"sku":"107812","price":30.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39765164654646,"sku":"107813","price":30.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39765164687414,"sku":"107815","price":30.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_5230.jpg?v=1636547505"},{"product_id":"magcad-garmin-1050-scott-creston-ic-sl-mount","title":"MagCAD Garmin 1050 Scott Creston iC SL Mount","description":"\u003cp\u003eMount your Garmin Edge 1050\/1040 computer in front of your Scott Creston iC SL handlebars with this MagCAD Mount. Not compatible with the newer Creston iC SL Aero handlebars.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed mount.\u003c\/li\u003e\n\u003cli\u003e1x M4x25mm button head screw.\u003c\/li\u003e\n\u003cli\u003e1x M4x16mm button head screw.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Garmin device and Creston handlebars pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eThis mounts uses the two existing M4 Cap Screws underneath your Scott Creston iC SL integrated handlebars to mount your Garmin Edge 1050 device. The mount holds your device in the perfect position just in front of your handlebar leading edge.\u003c\/p\u003e\n\u003cp\u003eThe MagCAD Garmin 1050 Scott Creston iC SL Mount is designed to suit the larger Garmin Edge 1050 \u0026amp; 1040 device but will work with all Garmin Edge devices. It is extremely strong and stiff, keeping your device securely positioned in front of your stem. Please note there is a shorter version of this mount designed for the smaller Garmin Edge devices.\u003c\/p\u003e\n\u003cp\u003ePlease note: This mount is not compatible with the newer Scott Creston iC SL Aero handlebars. It is only compatible with the original Creston iC SL handlebars.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attached to the underside of your Creston handlebars.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAll Garmin Edge devices including the new Garmin Edge 1050.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eScott Creston iC SL handlebars.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Scott Creston iC SL Aero handlebars.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 35 grams (without hardware), 39 grams (with hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Scott Sports SA, Garmin Ltd, or their products and services. Scott, Garmin, and their respective logos are trademarks or registered trademarks of Scott Sports SA and Garmin Ltd.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39765192441910,"sku":"106710","price":37.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39765192474678,"sku":"106711","price":37.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39765192507446,"sku":"106712","price":37.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39765192540214,"sku":"106713","price":37.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39765192572982,"sku":"106715","price":37.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_5222.jpg?v=1636548410"},{"product_id":"magcad-wahoo-elemnt-scott-creston-ic-sl-mount","title":"MagCAD Wahoo Elemnt Scott Creston iC SL Mount","description":"\u003cp\u003eMount your Wahoo Elemnt computer in front of your Scott Creston iC SL handlebars with this MagCAD Mount.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount, 1x M4x25mm button head screw, 1x M4x16mm button head screw.\u003c\/p\u003e\n\u003cp\u003eThe Wahoo device and Creston handlebars pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eThis mounts uses the two existing M4 Cap Screws underneath your Scott Creston iC SL integrated handlebars to mount your Wahoo Elemnt device. The mount holds your device in the perfect position just in front of your handlebar leading edge.\u003c\/p\u003e\n\u003cp\u003eThe MagCAD Wahoo Elemnt Scott Creston iC SL Mount is designed for the original larger Wahoo Elemnt device but is compatible with all Wahoo Elemnt devices; Mini, Bolt (V1), Bolt (V2) \u0026amp; Roam. It is extremely strong and stiff, keeping your device securely positioned in front of your stem.\u003c\/p\u003e\n\u003cp\u003ePlease note: This mount is not compatible with the newer Scott Creston iC SL Aero handlebars. It is only compatible with the original Creston iC SL handlebars.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attached to the underside of your Creston handlebars.\u003c\/p\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt devices; Elemnt, Mini, Bolt (V1), Bolt (V2), Roam.\u003c\/li\u003e\n\u003cli\u003eScott Creston iC SL handlebars.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Scott Creston iC SL Aero handlebars.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 32 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39765202206774,"sku":"108110","price":32.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39765202239542,"sku":"108111","price":32.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39765202272310,"sku":"108112","price":32.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39765202305078,"sku":"108113","price":32.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39765202337846,"sku":"108115","price":32.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_5432.jpg?v=1636548667"},{"product_id":"magcad-wahoo-elemnt-tether-bolt-and-roam","title":"MagCAD Wahoo Elemnt Tether - Bolt V1 and Roam V1","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed anchor, 1x adjustable lanyard, 1x M2 x 6mm countersunk screw.\u003c\/p\u003e\n\u003cp\u003eThe Wahoo devices pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eA tether for the Wahoo Elemnt Bolt (V1) or Elemnt Roam (V1) GPS computers. Attaches to the recess on the back of your device with the M2 screw (provided). The lanyard can then be secured to your handlebars before each ride, reducing the risk of accidently dropping your device.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca title=\"MagCAD Wahoo Elemnt Bolt V2 Tether\" href=\"https:\/\/www.magcad-designs.com\/products\/magcad-wahoo-elemnt-bolt-v2-tether\"\u003eMagCAD Wahoo Elemnt Bolt V2 Tether\u003c\/a\u003e for the newer Bolt (V2) which has a colour screen.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"https:\/\/www.magcad-designs.com\/products\/magcad-wahoo-elemnt-roam-v2-tether\" title=\"MagCAD Wahoo Elemnt Roam V2 Tether\"\u003eMagCAD Wahoo Elemnt Roam V2 Tether\u003c\/a\u003e for the newer Roam (V2) which is a larger device and has a colour screen\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003ePlace the Nylon anchor into the recess of your device and secure with the countersunk M2 screw provided. A Pozidrive or cross headed screwdriver should be used to install the screw without overtightening.\u003c\/p\u003e\n\u003cp\u003eNote the first time you install a tether into your Wahoo device the screw will cut a thread into the plastic. Therefore, you should apply some forward pressure at the same time as rotating the screw.\u003c\/p\u003e\n\u003cp\u003eBefore each ride loop the lanyard around your handlebars and install the computer onto its mount. The adjuster gives you an alternative way of securing to your bike as well as a way of keeping the cords tidy.\u003c\/p\u003e\n\u003cp\u003eThe lanyard is approx. 200mm in total length; long enough to suit the majority of installations without having lots of extra length on display. If you have particularly wide aero handlebars the tether may not be long enough to loop around the bar in the normal way. But it should be possible to attach it to something else like a cable or computer mount as an alternative.\u003c\/p\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt devices; Bolt (V1), Roam (V1).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 4 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39765225865270,"sku":"103610","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_2629.jpg?v=1636549888"},{"product_id":"magcad-wahoo-elemnt-bolt-v2-tether","title":"MagCAD Wahoo Elemnt Bolt V2 Tether","description":"\u003cp\u003eIMPORTANT: A running change has been made to the Wahoo Elemnt Bolt V2 device that means there are now two versions of tether. The version you require can be determined from either the serial number or a visual check of the tether recess on the back of the device.\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 78.3752px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 50%; text-align: center; height: 19.5938px;\"\u003eMagCAD Wahoo Elemnt Bolt V2 Tether\u003c\/td\u003e\n\u003ctd style=\"width: 50%; text-align: center; height: 19.5938px;\"\u003eMagCAD Wahoo Elemnt Bolt V2.1 Tether\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 50%; text-align: center; height: 19.5938px;\"\u003eModel: WFCC5 V2\u003c\/td\u003e\n\u003ctd style=\"width: 50%; text-align: center; height: 19.5938px;\"\u003eModel: WFCC5 V2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 50%; text-align: center; height: 19.5938px;\"\u003eManufactured before July 2024\u003c\/td\u003e\n\u003ctd style=\"width: 50%; text-align: center; height: 19.5938px;\"\u003eManufactured after July 2024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 50%; text-align: center; height: 19.5938px;\"\u003eSerial Number: \u0026lt; 43242600001\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px; text-align: center;\"\u003eSerial Number: \u0026gt; 43242600001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease contact us if you are unsure; share a quick photo of the back of your Wahoo device with tether recess and serial number and we will confirm.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed anchor.\u003c\/li\u003e\n\u003cli\u003e1x adjustable lanyard.\u003c\/li\u003e\n\u003cli\u003e1x M2 x 6mm countersunk screw.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Wahoo devices pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eA tether for the Wahoo Elemnt Bolt (V2) computers. Attaches to the recess on the back of your device with the M2 screw (provided). The lanyard can then be secured to your handlebars before each ride, reducing the risk of accidently dropping your device.\u003c\/p\u003e\n\u003cp\u003eThis tether is designed specifically for the Bolt (V2), launched in May 2021, featuring a colour screen and slightly larger size. This V2 tether is for devices manufactured before July 2024 and serial numbers preceding 43242600001.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"https:\/\/www.magcad-designs.com\/products\/magcad-wahoo-elemnt-bolt-v2-1-tether\" title=\"MagCAD Wahoo Elemnt Bolt V2.1 Tether\"\u003eMagCAD Wahoo Elemnt Bolt V2.1 Tether\u003c\/a\u003e for Bolt V2 devices with serial numbers following 43242600001.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"https:\/\/www.magcad-designs.com\/products\/magcad-wahoo-elemnt-tether-bolt-and-roam\" title=\"MagCAD Wahoo Elemnt Tether - Bolt (V1) and Roam (V1)\"\u003eMagCAD Wahoo Elemnt Tether - Bolt (V1) and Roam (V1)\u003c\/a\u003e for the original Bolt (V1) and Roam (V1) with black and white screen.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca title=\"MagCAD Wahoo Elemnt Roam V2 Tether\" href=\"https:\/\/www.magcad-designs.com\/products\/magcad-wahoo-elemnt-roam-v2-tether\"\u003eMagCAD Wahoo Elemnt Roam V2 Tether\u003c\/a\u003e for the Roam (V2) which is a larger device and has a colour screen.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eFitting the tether is a simple process:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eClean any dirt or debris out from the tether recess on the back of your device.\u003c\/li\u003e\n\u003cli\u003ePush the 3D printed tether block into the recess on the back of your device. The block should be a tight fit and sit flush with the back face of the device.\u003c\/li\u003e\n\u003cli\u003eSecure the 3D printed tether block with the countersunk M2 screw, supplied. A Pozidrive screwdriver should be used to install the screw. Using a Philips (cross head) screwdriver risks rounding the screw head. \u003c\/li\u003e\n\u003cli\u003eEnsure the screw sits flush with the 3D printed tether block and avoid overtightening.\u003c\/li\u003e\n\u003cli\u003eNOTE: The first time you install a tether into your Wahoo device the screw will cut a thread into the plastic hole. Therefore, you should apply some forward pressure at the same time as rotating the screw to allow the new thread to be cut. If the screw doesn't finish flush; remove it, clear out the hole and reinstall.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eBefore each ride loop the lanyard around your handlebars and install the computer onto its mount. The adjuster gives you an alternative way of securing to your bike as well as a way of keeping the cords tidy.\u003c\/p\u003e\n\u003cp\u003eThe lanyard is approx. 200mm in total length; long enough to suit the majority of installations without having lots of extra length on display. If you have particularly wide aero handlebars the tether may not be long enough to loop around the bar in the normal way. But it should be possible to attach it to something else like a cable or computer mount as an alternative.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt devices; Bolt (V2), manufactured before July 2024 and with serial numbers preceding 43242600001.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 4 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Wahoo Fitness LLC or their products and services. Wahoo and their respective logos are trademarks or registered trademarks of Wahoo Fitness LLC.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39765240741942,"sku":"106210","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_4650.jpg?v=1741695407"},{"product_id":"magcad-wahoo-elemnt-bolt-v2-blendr-bmc-mount-low","title":"MagCAD Wahoo Elemnt Bolt V2 Blendr\/BMC Mount - Low","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Wahoo Elemnt Bolt (V2) in front of your handlebars with Bontrager's Blendr or BMC's ICS stem mount systems. Both the Blendr and BMC mounting systems are based on the GoPro standard. Therefore this mount will be compatible with many more similar mounting systems.\u003c\/p\u003e\n\u003cp\u003eThis low version mount weighs just 12 grams (without hardware) and positions your device low in front of your handlebars.\u003c\/p\u003e\n\u003cp\u003ePlease note: This mount is only compatible with the Bolt (V2). It is not compatible with the Bolt (V1) launched March 2017 or the Bolt (V3) launched May 2025. It is also not compatible with other Elemnt computers like the Roam or Ace. For other Wahoo computers we have model specific mounts.\u003c\/p\u003e\n\u003cp\u003ePlease note: This low version mount requires adequate clearance around the mounting lug to align it horizontally. This mount is NOT compatible with the Trek RCS Pro stem which does not have enough clearance, both on the single and double Blendr base mounts. For assemblies with limited clearance our Short version mount is a better choice.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attach to the lug on your Blendr\/BMC mount and rotate the Wahoo unit to your preferred orientation. Carbon grit paste can be used to increase assembly grip.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt Bolt (V2) - New for May 2021, featuring a colour screen and slightly larger size compared with the Bolt (V1).\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Wahoo; Mini, Elemnt, Bolt (V1 \u0026amp; 3), Roam (V1, 2 \u0026amp; 3), Ace.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Trek RCS Pro stem.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 12 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Trek Bicycle Corporation (Bontrager), BMC Bicycles, Wahoo Fitness, LLC, or their products and services. Bontrager, BMC, Wahoo and their respective logos are trademarks or registered trademarks of Trek Bicycle Corporation (Bontrager), BMC Bicycles and Wahoo Fitness, LLC.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39768435916854,"sku":"106110","price":22.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39768435949622,"sku":"106111","price":22.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39768435982390,"sku":"106112","price":22.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39768436015158,"sku":"106113","price":22.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39768436047926,"sku":"106115","price":22.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_4641.jpg?v=1636634379"},{"product_id":"magcad-wahoo-elemnt-bolt-blendr-bmc-mount-short","title":"MagCAD Wahoo Elemnt Bolt Blendr\/BMC Mount - Short","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Wahoo Elemnt Bolt (V1) in front of your handlebars with Bontrager's Blendr or BMC's ICS stem mount systems. Both the Blendr and BMC mounting systems are based on the GoPro standard. Therefore this mount will be compatible with many more similar mounting systems.\u003c\/p\u003e\n\u003cp\u003eThis short version mount weighs just 7 grams (without hardware) and positions your device low in front of your handlebars.\u003c\/p\u003e\n\u003cp\u003ePlease note: This mount is only compatible with the Bolt (V1). It is not compatible with Bolt (V2) launched May 2021 or the Bolt (V3) launched May 2025. It is also not compatible with other Elemnt computers like the Roam or Ace. For other Wahoo computers we have model specific mounts.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attach to the lug on your Blendr\/BMC mount and rotate the Wahoo unit to your preferred orientation. Carbon grit paste can be used to increase assembly grip.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt Bolt (V1) - Sold between March 2017 - April 2021.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Wahoo; Mini, Elemnt, Bolt (V2 \u0026amp; 3), Roam (V1, 2 \u0026amp; 3), Ace.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 7 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Trek Bicycle Corporation (Bontrager), BMC Bicycles, Wahoo Fitness, LLC, or their products and services. Bontrager, BMC, Wahoo and their respective logos are trademarks or registered trademarks of Trek Bicycle Corporation (Bontrager), BMC Bicycles and Wahoo Fitness, LLC.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39768436998198,"sku":"101310","price":19.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39768437030966,"sku":"101311","price":19.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39768437063734,"sku":"101312","price":19.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39768437096502,"sku":"101313","price":19.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39768437129270,"sku":"101315","price":19.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/Wahoo_Blendr_Short_Assy_1.jpg?v=1636634698"},{"product_id":"magcad-wahoo-elemnt-bolt-blendr-bmc-mount-low","title":"MagCAD Wahoo Elemnt Bolt Blendr\/BMC Mount - Low","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Wahoo Elemnt Bolt (V1) in front of your handlebars with Bontrager's Blendr or BMC's ICS stem mount systems. Both the Blendr and BMC mounting systems are based on the GoPro standard. Therefore this mount will be compatible with many more similar mounting systems.\u003c\/p\u003e\n\u003cp\u003eThis low version mount weighs just 8 grams (without hardware) and positions your device low in front of your handlebars.\u003c\/p\u003e\n\u003cp\u003ePlease note: This mount is only compatible with the Bolt (V1). It is not compatible with Bolt (V2) launched May 2021 or the Bolt (V3) launched May 2025. It is also not compatible with other Elemnt computers like the Roam or Ace. For other Wahoo computers we have model specific mounts.\u003c\/p\u003e\n\u003cp\u003ePlease note: This low version mount requires adequate clearance around the mounting lug to align it horizontally. This mount is NOT compatible with the Trek RCS Pro stem which does not have enough clearance, both on the single and double Blendr base mounts. For assemblies with limit clearance our Short version mount is a better choice.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attach to the lug on your Blendr\/BMC mount and rotate the Wahoo unit to your preferred orientation. Carbon grit paste can be used to increase assembly grip.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt Bolt (V1) - Sold between March 2017 - April 2021.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Wahoo; Mini, Elemnt, Bolt (V2 \u0026amp; 3), Roam (V1, 2 \u0026amp; 3), Ace.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Trek RCS Pro stem.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 8 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Trek Bicycle Corporation (Bontrager), BMC Bicycles, Wahoo Fitness, LLC, or their products and services. Bontrager, BMC, Wahoo and their respective logos are trademarks or registered trademarks of Trek Bicycle Corporation (Bontrager), BMC Bicycles and Wahoo Fitness, LLC.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39768440209462,"sku":"100510","price":17.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39768440242230,"sku":"100511","price":17.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39768440274998,"sku":"100512","price":17.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39768440307766,"sku":"100513","price":17.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39768440340534,"sku":"100515","price":17.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/WahooBoltBlendrMountPurpleweb4.jpg?v=1636635108"},{"product_id":"magcad-wahoo-elemnt-bolt-blendr-bmc-mount-short-low","title":"MagCAD Wahoo Elemnt Bolt Blendr\/BMC Mount - Short \u0026 Low","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Wahoo Elemnt Bolt (V1) in front of your handlebars with Bontrager's Blendr or BMC's ICS stem mount systems. Both the Blendr and BMC mounting systems are based on the GoPro standard. Therefore this mount will be compatible with many more similar mounting systems.\u003c\/p\u003e\n\u003cp\u003eThis short \u0026amp; low version mount weighs just 12 grams (without hardware) and positions your device as close as possible in front of your handlebars.\u003c\/p\u003e\n\u003cp\u003ePlease note: This mount is only compatible with the Bolt (V1). It is not compatible with Bolt (V2) launched May 2021 or the Bolt (V3) launched May 2025. It is also not compatible with other Elemnt computers like the Roam or Ace. For other Wahoo computers we have model specific mounts.\u003c\/p\u003e\n\u003cp\u003ePlease note: This low version mount requires adequate clearance around the mounting lug to align it horizontally. This mount is NOT compatible with the Trek RCS Pro stem which does not have enough clearance, both on the single and double Blendr base mounts. For assemblies with limit clearance our Short version mount is a better choice.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attach to the lug on your Blendr\/BMC mount and rotate the Wahoo unit to your preferred orientation. Carbon grit paste can be used to increase assembly grip.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt Bolt (V1) - Sold between March 2017 - April 2021.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Wahoo; Mini, Elemnt, Bolt (V2 \u0026amp; 3), Roam (V1, 2 \u0026amp; 3), Ace.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Trek RCS Pro stem.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 12 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Trek Bicycle Corporation (Bontrager), BMC Bicycles, Wahoo Fitness, LLC, or their products and services. Bontrager, BMC, Wahoo and their respective logos are trademarks or registered trademarks of Trek Bicycle Corporation (Bontrager), BMC Bicycles and Wahoo Fitness, LLC.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39768441421878,"sku":"107710","price":19.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39768441454646,"sku":"107711","price":19.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39768441487414,"sku":"107712","price":19.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39768441520182,"sku":"107713","price":19.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39768441552950,"sku":"107715","price":19.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_5162.jpg?v=1636635491"},{"product_id":"magcad-wahoo-elemnt-roam-blendr-bmc-mount-short","title":"MagCAD Wahoo Elemnt Roam Blendr\/BMC Mount - Short","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Wahoo Elemnt Roam V1 or V2 in front of your handlebars with Bontrager's Blendr or BMC's ICS stem mount systems. Both the Blendr and BMC mounting systems are based on the GoPro standard. Therefore, this mount will be compatible with many more similar mounting systems.\u003c\/p\u003e\n\u003cp\u003eThis short version mount weighs just 16 grams (without hardware) and positions your device just in front of your handlebars.\u003c\/p\u003e\n\u003cp\u003ePlease note: This mount is only compatible with the Roam (V1 \u0026amp; 2). The Roam (V3), launched May 2025, will fit but leaves a lip around the outside of the device where the new computer differs in shape. This mount is not compatible with other computers in the Wahoo Elemnt range; Bolt (V1, 2 \u0026amp; 3) or the Ace. For other Wahoo computers we have model specific mounts.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attach to the lug on your Blendr\/BMC mount and rotate the Wahoo unit to your preferred orientation. Carbon grit paste can be used to increase assembly grip.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt Roam V1 and V2.\u003c\/li\u003e\n\u003cli\u003eWill fit the Wahoo Elemnt Roam V3 but not perfectly.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Wahoo; Mini, Elemnt, Bolt (V1, 2 \u0026amp; 3), Ace.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 16 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Trek Bicycle Corporation (Bontrager), BMC Bicycles, Wahoo Fitness, LLC, or their products and services. Bontrager, BMC, Wahoo and their respective logos are trademarks or registered trademarks of Trek Bicycle Corporation (Bontrager), BMC Bicycles and Wahoo Fitness, LLC.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39768718999606,"sku":"102010","price":23.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39768719032374,"sku":"102011","price":23.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39768719065142,"sku":"102012","price":23.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39768719097910,"sku":"102013","price":23.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39768719130678,"sku":"102015","price":23.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_6499.jpg?v=1645443781"},{"product_id":"magcad-wahoo-elemnt-roam-blendr-bmc-mount-low","title":"MagCAD Wahoo Elemnt Roam Blendr\/BMC Mount - Low","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Wahoo Elemnt Roam V1 or V2 in front of your handlebars with Bontrager's Blendr or BMC's ICS stem mount systems. Both the Blendr and BMC mounting systems are based on the GoPro standard. Therefore, this mount will be compatible with many more similar mounting systems.\u003c\/p\u003e\n\u003cp\u003eThis low version mount weighs just 18 grams (without hardware) and positions your device low in front of your handlebars.\u003c\/p\u003e\n\u003cp\u003ePlease note: This mount is only compatible with the Roam (V1 \u0026amp; 2). The Roam (V3), launched May 2025, will fit but leaves a lip around the outside of the device where the new computer differs in shape. This mount is not compatible with other computers in the Wahoo Elemnt range; Bolt (V1, 2 \u0026amp; 3) or the Ace. For other Wahoo computers we have model specific mounts.\u003c\/p\u003e\n\u003cp\u003ePlease note: This low version mount requires adequate clearance around the mounting lug to align it horizontally. This mount is NOT compatible with the Trek RCS Pro stem which does not have enough clearance, both on the single and double Blendr base mounts. For assemblies with limited clearance our Short version mount is a better choice.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attach to the lug on your Blendr\/BMC mount and rotate the Wahoo unit to your preferred orientation. Carbon grit paste can be used to increase assembly grip.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt Roam V1 and V2.\u003c\/li\u003e\n\u003cli\u003eWill fit the Wahoo Elemnt Roam V3 but not perfectly.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Wahoo; Mini, Elemnt, Bolt (V1, 2 \u0026amp; 3), Ace.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Trek RCS Pro stem.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 18 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Trek Bicycle Corporation (Bontrager), BMC Bicycles, Wahoo Fitness, LLC, or their products and services. Bontrager, BMC, Wahoo and their respective logos are trademarks or registered trademarks of Trek Bicycle Corporation (Bontrager), BMC Bicycles and Wahoo Fitness, LLC.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39768725192758,"sku":"102810","price":26.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39768725225526,"sku":"102811","price":26.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39768725258294,"sku":"102812","price":26.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39768725291062,"sku":"102813","price":26.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39768725323830,"sku":"102815","price":26.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_6277.jpg?v=1643039725"},{"product_id":"magcad-wahoo-elemnt-blendr-bmc-mount-short","title":"MagCAD Wahoo Elemnt Blendr\/BMC Mount - Short","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Wahoo Elemnt in front of your handlebars with Bontrager's Blendr or BMC's ICS stem mount systems. Both the Blendr and BMC mounting systems are based on the GoPro standard. Therefore this mount will be compatible with many more similar mounting systems.\u003c\/p\u003e\n\u003cp\u003eThis short version mount weighs just 9 grams (without hardware) and positions your device just in front of your handlebars. The mounting interface is compatible with all Wahoo Elemnt computers, but clearance for the larger devices will depend on your exact handlebar and stem setup. Larger computers will extend behind the mounting lug and therefore require clearance above your handlebars.\u003c\/p\u003e\n\u003cp\u003eWe have both longer and computer specific aero versions of this MagCAD Blendr\/BMC Mount - Short, if needed.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attach to the lug on your Blendr\/BMC mount and rotate the Wahoo unit to your preferred orientation. Carbon grit paste can be used to increase assembly grip.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt devices; Mini, Elemnt, Bolt (V1, 2 \u0026amp; 3), Roam (V1, 2 \u0026amp; 3), depending on your handlebar and stem clearance.\u003c\/li\u003e\n\u003cli\u003eNot recommended for use with the Wahoo Elemnt Ace.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 9 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Trek Bicycle Corporation (Bontrager), BMC Bicycles, Wahoo Fitness, LLC, or their products and services. Bontrager, BMC, Wahoo and their respective logos are trademarks or registered trademarks of Trek Bicycle Corporation (Bontrager), BMC Bicycles and Wahoo Fitness, LLC.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39768734007350,"sku":"102710","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39768734040118,"sku":"102711","price":12.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39768734072886,"sku":"102712","price":12.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39768734105654,"sku":"102713","price":12.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39768734138422,"sku":"102715","price":12.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_7706.jpg?v=1655212942"},{"product_id":"magcad-wahoo-elemnt-blendr-bmc-mount-low","title":"MagCAD Wahoo Elemnt Blendr\/BMC Mount - Low","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Wahoo Elemnt in front of your handlebars with Bontrager's Blendr or BMC's ICS stem mount systems. Both the Blendr and BMC mounting systems are based on the GoPro standard. Therefore this mount will be compatible with many more similar mounting systems.\u003c\/p\u003e\n\u003cp\u003eThis low version mount weighs just 16 grams (without hardware) and positions your device low in front of your handlebars. This mount is compatible with the Wahoo Elemnt devices; Mini, Elemnt, Bolt (V1, 2 \u0026amp; 3), Roam (V1, 2 \u0026amp; 3). It is not compatible with the Wahoo Elemnt Ace.\u003c\/p\u003e\n\u003cp\u003ePlease note: This low version mount requires adequate clearance around the mounting lug to align it horizontally. This mount is NOT compatible with the Trek RCS Pro stem which does not have enough clearance, both on the single and double Blendr base mounts. For assemblies with limited clearance our Short version mount is a better choice.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attach to the lug on your Blendr\/BMC mount and rotate the Wahoo unit to your preferred orientation. Carbon grit paste can be used to increase assembly grip.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt devices; Mini, Elemnt, Bolt (V1, 2 \u0026amp; 3), Roam (V1, 2 \u0026amp; 3), depending on your handlebar and stem clearance.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Wahoo Elemnt Ace.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Trek RCS Pro stem.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 16 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Trek Bicycle Corporation (Bontrager), BMC Bicycles, Wahoo Fitness, LLC, or their products and services. Bontrager, BMC, Wahoo and their respective logos are trademarks or registered trademarks of Trek Bicycle Corporation (Bontrager), BMC Bicycles and Wahoo Fitness, LLC.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39768742821942,"sku":"101810","price":23.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39768742854710,"sku":"101811","price":23.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39768742887478,"sku":"101812","price":23.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39768742920246,"sku":"101813","price":23.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39768742953014,"sku":"101815","price":23.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/files\/Wahoo_Elemnt_Blendr_Mount_Low_Black_281124_6.jpg?v=1732799285"},{"product_id":"magcad-garmin-blendr-bmc-mount-low","title":"MagCAD Garmin Blendr\/BMC Mount - Low","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Garmin Edge computer in front of your handlebars with Bontrager's Blendr or BMC's ICS stem mount systems. Both the Blendr and BMC mounting systems are based on the GoPro standard. Therefore this mount will be compatible with many more similar mounting systems.\u003c\/p\u003e\n\u003cp\u003eThis low version mount weighs just 15 grams (without hardware) and positions your device low in front of your handlebars. The mount is designed to suit Garmin Edge devices up to the size of the 840. There is a longer version of this mount designed specifically for the Garmin 1050.\u003c\/p\u003e\n\u003cp\u003ePlease note: This low version mount requires adequate clearance around the mounting lug to align it horizontally. This mount is NOT compatible with the Trek RCS Pro stem which does not have enough clearance, both on the single and double Blendr base mounts. For assemblies with limited clearance our Short version mount is a better choice.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attach to the lug on your Blendr\/BMC mount and rotate the Garmin device to your preferred orientation.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eGarmin Edge devices (small\/medium): 130 Plus, 540, 840.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Trek RCS Pro stem.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 15 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Garmin Ltd, or their products and services. Garmin and their respective logos are trademarks or registered trademarks of Garmin Ltd.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39768744984630,"sku":"102910","price":23.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39768745017398,"sku":"102911","price":23.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39768745050166,"sku":"102912","price":23.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39768745082934,"sku":"102913","price":23.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39768745115702,"sku":"102915","price":23.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/files\/Garmin_Blendr_BMC_Mount_Low_Black_271124_7.jpg?v=1732708265"},{"product_id":"magcad-garmin-1050-blendr-bmc-mount-low","title":"MagCAD Garmin 1050 Blendr\/BMC Mount - Low","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Garmin Edge 1050\/1040 computer in front of your handlebars with Bontrager's Blendr or BMC's ICS stem mount systems. Both the Blendr and BMC mounting systems are based on the GoPro standard. Therefore this mount will be compatible with many more similar mounting systems.\u003c\/p\u003e\n\u003cp\u003eThis low version mount weighs just 18 grams (without hardware) and positions your device low in front of your handlebars. The low shape of the mount does require adequate clearance around your Blendr\/BMC base lug and may not suit all installations.\u003c\/p\u003e\n\u003cp\u003eThis design has been subtly modified, now 7mm longer than the previous 1040 version, to suit the new Garmin Edge 1050. It remains compatible with all other Garmin Edge devices. Please note there is a shorter version of this mount designed for the smaller Garmin Edge devices.\u003c\/p\u003e\n\u003cp\u003ePlease note: This low version mount requires adequate clearance around the mounting lug to align it horizontally. This mount is NOT compatible with the Trek RCS Pro stem which does not have enough clearance, both on the single and double Blendr base mounts. For assemblies with limited clearance our Short version mount is a better choice.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attach to the lug on your Blendr\/BMC mount and rotate the Garmin device to your preferred orientation.\u003c\/p\u003e\n\u003cp\u003ePlease Note: We recommend using a tether with your Garmin device just for extra security.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAll Garmin Edge devices.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Trek RCS Pro stem.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 18 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Garmin Ltd, or their products and services. Garmin and their respective logos are trademarks or registered trademarks of Garmin Ltd.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39768752980022,"sku":"103010","price":27.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39768753012790,"sku":"103011","price":27.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39768753045558,"sku":"103012","price":27.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39768753078326,"sku":"103013","price":27.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39768753111094,"sku":"103015","price":27.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_8302.jpg?v=1660127886"},{"product_id":"magcad-garmin-1050-blendr-bmc-mount-short","title":"MagCAD Garmin 1050 Blendr\/BMC Mount - Short","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Garmin Edge 1050\/1040 computer in front of your handlebars with Bontrager's Blendr or BMC's ICS stem mount systems. Both the Blendr and BMC mounting systems are based on the GoPro standard. Therefore, this mount will be compatible with many more similar mounting systems.\u003c\/p\u003e\n\u003cp\u003eThis short version mount weighs just 15 grams (without hardware) and positions your device close to the front of your handlebars.\u003c\/p\u003e\n\u003cp\u003eThis design has been subtly modified, now 7mm longer than the previous 1040 version, to suit the new Garmin Edge 1050. It remains compatible with all other Garmin Edge devices. Please note there is a shorter version of this mount designed for the smaller Garmin Edge devices.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attach to the lug on your Blendr\/BMC mount and rotate the Garmin device to your preferred orientation.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAll Garmin Edge devices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 15 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Garmin Ltd, or their products and services. Garmin and their respective logos are trademarks or registered trademarks of Garmin Ltd.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39768771526710,"sku":"103110","price":25.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39768771559478,"sku":"103111","price":25.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39768771592246,"sku":"103112","price":25.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39768771625014,"sku":"103113","price":25.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39768771657782,"sku":"103115","price":25.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_2421.jpg?v=1636638801"},{"product_id":"magcad-garmin-blendr-bmc-mount-medium","title":"MagCAD Garmin Blendr\/BMC Mount - Medium","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Garmin Edge computer in front of your handlebars with Bontrager's Blendr or BMC's ICS stem mount systems. Both the Blendr and BMC mounting systems are based on the GoPro standard. Therefore this mount will be compatible with many more similar mounting systems.\u003c\/p\u003e\n\u003cp\u003eThis medium length version mount weighs just 12 grams (without hardware) and positions your device just in front of your handlebars. The mount is designed to suit Garmin Edge devices up to the size of the 840. There is a longer version of this mount designed specifically for the Garmin 1050.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attach to the lug on your Blendr\/BMC mount and rotate the Garmin device to your preferred orientation.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eGarmin Edge devices (small\/medium): 130 Plus, 540, 840.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 12 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Garmin Ltd, or their products and services. Garmin and their respective logos are trademarks or registered trademarks of Garmin Ltd.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39768779423798,"sku":"104510","price":21.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39768779456566,"sku":"104511","price":21.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39768779489334,"sku":"104512","price":21.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39768779522102,"sku":"104513","price":21.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39768779554870,"sku":"104515","price":21.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/files\/Garmin_Blendr_BMC_Mount_Short_Black_271124_5.jpg?v=1732715505"},{"product_id":"magcad-wahoo-elemnt-blendr-bmc-mount-long","title":"MagCAD Wahoo Elemnt Blendr\/BMC Mount - Long","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Wahoo Elemnt in front of your handlebars with Bontrager's Blendr or BMC's ICS stem mount systems. Both the Blendr and BMC mounting systems are based on the GoPro standard. Therefore this mount will be compatible with many more similar mounting systems.\u003c\/p\u003e\n\u003cp\u003eThis long version mount weighs just 10 grams (without hardware) and positions your device in front of your handlebars. The mounting interface is compatible with all Wahoo Elemnt computers, but clearance for the larger devices will depend on your exact handlebar and stem setup. Larger computers will extend behind the mounting lug and therefore require clearance above your handlebars.\u003c\/p\u003e\n\u003cp\u003eWe have both longer and computer specific aero versions of this MagCAD Blendr\/BMC Mount - Long, if needed.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attach to the lug on your Blendr\/BMC mount and rotate the Wahoo unit to your preferred orientation. Carbon grit paste can be used to increase assembly grip.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt devices; Mini, Elemnt, Bolt (V1, 2 \u0026amp; 3), Roam (V1, 2 \u0026amp; 3), depending on your handlebar and stem clearance.\u003c\/li\u003e\n\u003cli\u003eNot recommended for use with the Wahoo Elemnt Ace.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 10 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Trek Bicycle Corporation (Bontrager), BMC Bicycles, Wahoo Fitness, LLC, or their products and services. Bontrager, BMC, Wahoo and their respective logos are trademarks or registered trademarks of Trek Bicycle Corporation (Bontrager), BMC Bicycles and Wahoo Fitness, LLC.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39768790237238,"sku":"101710","price":18.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39768790270006,"sku":"101711","price":18.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39768790302774,"sku":"101712","price":18.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39768790335542,"sku":"101713","price":18.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39768790368310,"sku":"101715","price":18.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_1928.jpg?v=1636639338"},{"product_id":"magcad-hammerhead-karoo-3-blendr-bmc-mount-short","title":"MagCAD Hammerhead Karoo 3 Blendr\/BMC Mount - Short","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount.\u003c\/p\u003e\n\u003cp\u003eThe Hammerhead device and stem pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Hammerhead Karoo 2 or Karoo 3 in front of your handlebars with Bontrager's Blendr or BMC's ICS stem mount systems. Both the Blendr and BMC mounting systems are based on the GoPro standard. Therefore this mount will be compatible with many more similar mounting systems.\u003c\/p\u003e\n\u003cp\u003eExact clearance for your Karoo 2 or Karoo 3 device will depend on the position and orientation of your base lug, not supplied, and you should check first to ensure you have adequate clearance to twist and remove your Hammerhead device. If in doubt feel free to get in contact with us.\u003c\/p\u003e\n\u003cp\u003eThis short version mount weighs just 14 grams (without hardware) and positions your device in front of your handlebars.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attach to the lug on your Blendr\/BMC mount and rotate the Hammerhead unit to your preferred orientation before tightening.\u003c\/p\u003e\n\u003cp\u003eTo attach your Hammerhead device simply follow the same procedure as with the OEM Hammerhead mount, pulling the device backward onto the mount with a slight twist to centre and locate it. You should here a positive click when the device is attached. We recommend using the tether that's supplied with your Hammerhead device just for extra security.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHammerhead Karoo 2 \u0026amp; Karoo 3.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 14 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39770262437942,"sku":"108610","price":21.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39770262470710,"sku":"108611","price":21.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39770262503478,"sku":"108612","price":21.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39770262536246,"sku":"108613","price":21.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39770262569014,"sku":"108615","price":21.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_5744.jpg?v=1638528556"},{"product_id":"magcad-garmin-1050-easton-icm-mount","title":"MagCAD Garmin 1050 Easton ICM Mount","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed mount.\u003c\/li\u003e\n\u003cli\u003e1x M5x20mm cap screw.\u003c\/li\u003e\n\u003cli\u003e1x M5 curved tee nut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Garmin device and Easton stem pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Garmin Edge computer in front of your compatible Easton ICM stem with this MagCAD Mount. The Easton ICM stems have a specially designed faceplate and retained nut that provides a secure point to attach a computer mount.\u003c\/p\u003e\n\u003cp\u003eWeighing only 15 grams (without hardware) the MagCAD mount is extremely strong and stiff, keeping your device securely positioned in front of your stem.\u003c\/p\u003e\n\u003cp\u003eThis design has been subtly modified, now 7mm longer than the previous 1040 version, to suit the new Garmin Edge 1050. It remains compatible with all other Garmin Edge devices. Please note there is a shorter version of this mount designed for the smaller Garmin Edge devices.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eFitting the MagCAD mount is a simple process. Should you require any further clarification to the below please get in contact.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the faceplate from your stem.\u003c\/li\u003e\n\u003cli\u003eInsert the curved tee nut into the back of the faceplate.\u003c\/li\u003e\n\u003cli\u003eBolt the mount through the faceplate and into the curved tee nut and loosely tighten.\u003c\/li\u003e\n\u003cli\u003ePivot the mount to the centre of the slot and fully tighten.\u003c\/li\u003e\n\u003cli\u003eCheck the mounting bolt is long enough to fully engage with the tee nut but not too long to protrude past the tee nut and foul your handlebars.\u003c\/li\u003e\n\u003cli\u003eReassemble the faceplate to your stem following the stem manufacturers instructions.\u003c\/li\u003e\n\u003cli\u003eLoosen the mount and pivot to your preferred orientation before retightening.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eAll Garmin Edge devices come with a lanyard for extra security. We recommend using this lanyard alongside our MagCAD mount to avoid any risk of damage due to incorrect assembly or mis-use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAll Garmin Edge devices including the new Garmin Edge 1050.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 15 grams (without hardware), 22 grams (with hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Easton Cycling, Garmin Ltd, or their products and services. Easton, Garmin and their respective logos are trademarks or registered trademarks of Fox Factory Inc and Garmin Ltd.\u003c\/span\u003e\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39771283423286,"sku":"102310","price":21.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39771283456054,"sku":"102311","price":21.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39771283488822,"sku":"102312","price":21.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39771283521590,"sku":"102313","price":21.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39771283554358,"sku":"102315","price":21.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_1818_web.jpg?v=1636734751"},{"product_id":"magcad-garmin-easton-icm-mount","title":"MagCAD Garmin Easton ICM Mount","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed mount.\u003c\/li\u003e\n\u003cli\u003e1x M5x16mm cap screw.\u003c\/li\u003e\n\u003cli\u003e1x M5 curved tee nut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Garmin device and Easton stem pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Garmin Edge computer in front of your compatible Easton ICM stem with this MagCAD Mount. The Easton ICM stems have a specially designed faceplate and retained nut that provides a secure point to attach a computer mount.\u003c\/p\u003e\n\u003cp\u003eWeighing only 10 grams (without hardware) the MagCAD mount is extremely strong and stiff, keeping your device securely positioned in front of your stem.\u003c\/p\u003e\n\u003cp\u003eThe MagCAD Garmin Easton ICM Mount is designed to suit Garmin Edge devices up to the size of the 540 and 840. See our \u003ca title=\"MagCAD Garmin 1050 Easton ICM Mount\" href=\"https:\/\/www.magcad-designs.com\/products\/magcad-garmin-1050-easton-icm-mount\"\u003eMagCAD Garmin 1050 Easton ICM Mount\u003c\/a\u003e for a longer version to suit the largest Garmin Edge 1050 and 1040 devices.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eFitting the MagCAD mount is a simple process. Should you require any further clarification to the below please get in contact.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the faceplate from your stem.\u003c\/li\u003e\n\u003cli\u003eInsert the curved tee nut into the back of the faceplate.\u003c\/li\u003e\n\u003cli\u003eBolt the mount through the faceplate and into the curved tee nut and loosely tighten.\u003c\/li\u003e\n\u003cli\u003ePivot the mount to the centre of the slot and fully tighten.\u003c\/li\u003e\n\u003cli\u003eCheck the mounting bolt is long enough to fully engage with the tee nut but not too long to protrude past the tee nut and foul your handlebars.\u003c\/li\u003e\n\u003cli\u003eReassemble the faceplate to your stem following the stem manufacturers instructions.\u003c\/li\u003e\n\u003cli\u003eLoosen the mount and pivot to your preferred orientation before retightening.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eAll Garmin Edge devices come with a lanyard for extra security. We recommend using this lanyard alongside our MagCAD mount to avoid any risk of damage due to incorrect assembly or mis-use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eGarmin Edge devices (small\/medium): 130 Plus, 540, 840.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 10 grams (without hardware), 17 grams (with hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Easton Cycling, Garmin Ltd, or their products and services. Easton, Garmin and their respective logos are trademarks or registered trademarks of Fox Factory Inc and Garmin Ltd.\u003c\/span\u003e\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39771303084086,"sku":"102510","price":19.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39771303116854,"sku":"102511","price":19.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39771303149622,"sku":"102512","price":19.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39771303182390,"sku":"102513","price":19.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39771303215158,"sku":"102515","price":19.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_1880_web.jpg?v=1636735145"},{"product_id":"magcad-wahoo-elemnt-bolt-easton-icm-mount","title":"MagCAD Wahoo Elemnt Bolt Easton ICM Mount","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount, 1x M5x12mm cap screw, 1x M5 tee nut.\u003c\/p\u003e\n\u003cp\u003eThe Wahoo device and Easton stem pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Wahoo Elemnt Bolt (V1) computer in front of your compatible Easton ICM stem with this MagCAD Mount. The Easton ICM stems have a specially designed faceplate and retained nut that provides a secure point to attach a computer mount.\u003c\/p\u003e\n\u003cp\u003eThe MagCAD Easton ICM Wahoo Elemnt Bolt Mount is designed specifically for the shape of the Bolt (V1). It is extremely strong and stiff, keeping your device securely positioned in front of your stem.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eFitting the MagCAD mount is a simple process. Simply bolt through the Easton ICM stem faceplate into the retained nut and rotate the mount to your preferred orientation before fully tightening.\u003c\/p\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt Bolt (V1) - Sold between March 2017 - April 2021.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 9 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39771304919094,"sku":"102410","price":19.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39771304951862,"sku":"102411","price":19.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39771304984630,"sku":"102412","price":19.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39771305017398,"sku":"102413","price":19.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39771305050166,"sku":"102415","price":19.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_9025.jpg?v=1670931136"},{"product_id":"magcad-wahoo-elemnt-easton-icm-mount","title":"MagCAD Wahoo Elemnt Easton ICM Mount","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount, 1x M5x12mm cap screw, 1x M5 tee nut.\u003c\/p\u003e\n\u003cp\u003eThe Wahoo device and Easton stem pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Wahoo Elemnt computer in front of your compatible Easton ICM stem with this MagCAD Mount. The Easton ICM stems have a specially designed faceplate and retained nut that provides a secure point to attach a computer mount.\u003c\/p\u003e\n\u003cp\u003eThe MagCAD Wahoo Elemnt Easton ICM Mount is designed for the original larger Wahoo Elemnt device but is compatible with all Wahoo Elemnt devices; Mini, Bolt (V1), Bolt (V2) \u0026amp; Roam. It is extremely strong and stiff, keeping your device securely positioned in front of your stem.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eFitting the MagCAD mount is a simple process. Simply bolt through the Easton ICM stem faceplate into the retained nut and rotate the mount to your preferred orientation before fully tightening.\u003c\/p\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt devices; Elemnt, Mini, Bolt (V1), Bolt (V2), Roam.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 11 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39771310915638,"sku":"102610","price":23.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39771310948406,"sku":"102611","price":23.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39771310981174,"sku":"102612","price":23.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39771311013942,"sku":"102613","price":23.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39771311046710,"sku":"102615","price":23.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_2034_web.jpg?v=1636735834"},{"product_id":"magcad-wahoo-elemnt-roam-easton-icm-mount","title":"MagCAD Wahoo Elemnt Roam Easton ICM Mount","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount, 1x M5x16mm cap screw, 1x M5 tee nut.\u003c\/p\u003e\n\u003cp\u003eThe Wahoo device and Easton stem pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Wahoo Elemnt Roam V1 or V2 computer in front of your compatible Easton ICM stem with this MagCAD Mount. The Easton ICM stems have a specially designed faceplate and retained nut that provides a secure point to attach a computer mount.\u003c\/p\u003e\n\u003cp\u003eThe MagCAD Easton ICM Wahoo Elemnt Roam Mount is designed specifically for the shape of the Roam. It is extremely strong and stiff, keeping your device securely positioned in front of your stem.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eFitting the MagCAD mount is a simple process. Simply bolt through the Easton ICM stem faceplate into the retained nut and rotate the mount to your preferred orientation before fully tightening.\u003c\/p\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt Roam V1 and V2.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 12 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39771312816182,"sku":"103310","price":26.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39771312848950,"sku":"103311","price":26.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39771312881718,"sku":"103312","price":26.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39771312914486,"sku":"103313","price":26.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39771312947254,"sku":"103315","price":26.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_9034.jpg?v=1670931376"},{"product_id":"magcad-wahoo-elemnt-bolt-v2-easton-icm-mount","title":"MagCAD Wahoo Elemnt Bolt V2 Easton ICM Mount","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed mount.\u003c\/li\u003e\n\u003cli\u003e1x M5x12mm cap screw.\u003c\/li\u003e\n\u003cli\u003e1x M5 curved tee nut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Wahoo device and Easton stem pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Wahoo Elemnt Bolt (V2) computer in front of your compatible Easton ICM stem with this MagCAD Mount. The Easton ICM stems have a specially designed faceplate and retained nut that provides a secure point to attach a computer mount.\u003c\/p\u003e\n\u003cp\u003eThe MagCAD Easton ICM Wahoo Elemnt Bolt Mount is designed specifically for the shape of the Bolt (V2). It is extremely strong and stiff, keeping your device securely positioned in front of your stem.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eFitting the MagCAD mount is a simple process. Simply bolt through the Easton ICM stem faceplate into the retained nut and rotate the mount to your preferred orientation before fully tightening.\u003c\/p\u003e\n\u003ch5\u003e\u003cbr\u003e\u003c\/h5\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt Bolt (V2) - New for May 2021, featuring a colour screen and slightly larger size compared with the Bolt (V1).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 10 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39771317960758,"sku":"107610","price":20.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39771317993526,"sku":"107611","price":20.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39771318026294,"sku":"107612","price":20.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39771318059062,"sku":"107613","price":20.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39771318091830,"sku":"107615","price":20.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_5122.jpg?v=1636736323"},{"product_id":"magcad-wahoo-elemnt-roam-gopro-easton-icm-mount","title":"MagCAD Wahoo Elemnt Roam GoPro Easton ICM Mount","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed mount.\u003c\/li\u003e\n\u003cli\u003e1x M5x16mm cap screw.\u003c\/li\u003e\n\u003cli\u003e1x M5 tee nut.\u003c\/li\u003e\n\u003cli\u003e1x M5x20mm button head screw.\u003c\/li\u003e\n\u003cli\u003e1x M5 dome nut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Wahoo device and Easton stem pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Wahoo Elemnt Roam V1 or V2 computer in front of your compatible Easton ICM stem with this MagCAD Mount. The Easton ICM stems have a specially designed faceplate and retained nut that provides a secure point to attach a computer mount.\u003c\/p\u003e\n\u003cp\u003eThe MagCAD Easton ICM Wahoo Elemnt Roam Mount is designed specifically for the shape of the Roam. It is extremely strong and stiff, keeping your device securely positioned in front of your stem.\u003c\/p\u003e\n\u003cp\u003eA GoPro lug has been added underneath for maximum flexibility, allowing you to mount additional devices such as cameras and lights underneath your computer without cluttering the rest of your handlebars.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eFitting the MagCAD mount is a simple process. Simply bolt through the Easton ICM stem faceplate into the retained nut and rotate the mount to your preferred orientation before fully tightening.\u003c\/p\u003e\n\u003cp\u003ePlease Note: When mounting multiple devices off one mount we recommend using a tether just for extra security.\u003c\/p\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt Roam V1 and V2.\u003c\/li\u003e\n\u003cli\u003eAction cameras and lights with a GoPro type mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 16 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39771325562934,"sku":"104110","price":30.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39771325595702,"sku":"104111","price":30.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39771325628470,"sku":"104112","price":30.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39771325661238,"sku":"104113","price":30.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39771325694006,"sku":"104115","price":30.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/Wahoo_Roam_GoPro_Easton_Mount_091220_1.jpg?v=1636737093"},{"product_id":"magcad-garmin-gopro-easton-icm-mount","title":"MagCAD Garmin GoPro Easton ICM Mount","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed mount.\u003c\/li\u003e\n\u003cli\u003e1x M5x16mm cap screw.\u003c\/li\u003e\n\u003cli\u003e1x M5 curved tee nut.\u003c\/li\u003e\n\u003cli\u003e1x M5x20mm button head screw.\u003c\/li\u003e\n\u003cli\u003e1x M5 dome nut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Garmin device and Easton stem pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Garmin Edge computer in front of your compatible Easton ICM stem with this MagCAD Mount. The Easton ICM stems have a specially designed faceplate and retained nut that provides a secure point to attach a computer mount.\u003c\/p\u003e\n\u003cp\u003eThe MagCAD Garmin Easton ICM Mount is designed to suit Garmin Edge devices up to the size of the 840. It wont suit the largest Garmin 1040\/1050 devices.\u003c\/p\u003e\n\u003cp\u003eA GoPro lug has been added underneath for maximum flexibility, allowing you to mount additional devices such as cameras and lights underneath your computer without cluttering the rest of your handlebars.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eFitting the MagCAD mount is a simple process. Should you require any further clarification to the below please get in contact.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the faceplate from your stem.\u003c\/li\u003e\n\u003cli\u003eInsert the curved tee nut into the back of the faceplate.\u003c\/li\u003e\n\u003cli\u003eBolt the mount through the faceplate and into the curved tee nut and loosely tighten. You will need to use a ball end Allen key to tighten the bolt, due to the angle and proximity of the GoPro lug.\u003c\/li\u003e\n\u003cli\u003ePivot the mount to the centre of the slot and fully tighten.\u003c\/li\u003e\n\u003cli\u003eCheck the mounting bolt is long enough to fully engage with the tee nut but not too long to protrude past the tee nut and foul your handlebars.\u003c\/li\u003e\n\u003cli\u003eReassemble the faceplate to your stem following the stem manufacturers instructions.\u003c\/li\u003e\n\u003cli\u003eLoosen the mount and pivot to your preferred orientation before retightening.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003ePlease Note: When mounting multiple devices off one mount we recommend using a tether just for extra security.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eGarmin Edge devices (small\/medium): 130 Plus, 540, 840.\u003c\/li\u003e\n\u003cli\u003eAction cameras and lights with a GoPro type mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 13 grams (without hardware), 23 grams (with hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Easton Cycling, Garmin Ltd, or their products and services. Easton, Garmin and their respective logos are trademarks or registered trademarks of Fox Factory Inc and Garmin Ltd.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39771328020534,"sku":"107110","price":24.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39771328053302,"sku":"107111","price":24.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39771328086070,"sku":"107112","price":24.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39771328118838,"sku":"107113","price":24.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39771328151606,"sku":"107115","price":24.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_5015.jpg?v=1636737422"},{"product_id":"magcad-quad-lock-base-gopro-easton-icm-mount","title":"MagCAD Quad Lock Base GoPro Easton ICM Mount","description":"\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount, 1x M5x16mm cap screw, 1x M5 tee nut, 1x M5x30mm countersunk screw, 1x M5 Nyloc locking nut, 2x M3 threaded brass inserts.\u003c\/p\u003e\n\u003cp\u003eThe Quad Lock interface, Quad Lock Case and Easton stem pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eThis MagCAD mount provides a base for the Quad Lock interface (not provided), allowing you to mount your Quad Lock case and phone securely and cleanly in front of a compatible Easton ICM stem. The Easton ICM stems have a specially designed faceplate and retained nut that provides a secure point to attach a computer mount.\u003c\/p\u003e\n\u003cp\u003eThis mount is particularly useful for those with aero profiled handlebars that don't fit the standard Quad Lock handlebar clamp or for those simply looking for a really tidy and clean setup.\u003c\/p\u003e\n\u003cp\u003eThe Quad Lock interface can be purchased as part of the Quad Lock Out Front Pro Mount for bicycles or the Quad Lock Motorcycle mount.\u003c\/p\u003e\n\u003cp\u003eThe mount also contains 2x M3 threaded inserts, allowing you to mount the Quad Lock Camera\/Light adaptor (not included) underneath.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eFitting the MagCAD mount is a simple process. Simply bolt through the Easton ICM stem faceplate into the retained nut and rotate the mount to your preferred orientation before fully tightening.\u003c\/p\u003e\n\u003cp\u003eBolt the Quad Lock interface (not provided) to the top of the mount with the M5 x 30 countersunk screw and M5 locking nut and rotate to your preferred orientation before tightening.\u003c\/p\u003e\n\u003cp\u003ePlease Note: A tether should always be used as additional security for your phone.\u003c\/p\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eQuad Lock interface (not included).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 24 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39771331002422,"sku":"108310","price":26.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39771331035190,"sku":"108311","price":26.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39771331067958,"sku":"108312","price":26.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39771331100726,"sku":"108313","price":26.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39771331133494,"sku":"108315","price":26.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_5439.jpg?v=1636737587"},{"product_id":"magcad-garmin-most-talon-ultra-mount","title":"MagCAD Garmin MOst Talon Ultra Mount","description":"\u003cp\u003eMount your Garmin Edge computer in front of your MOst Talon Ultra handlebars with this MagCAD Mount.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed mount.\u003c\/li\u003e\n\u003cli\u003e2x M5x25mm button head screws.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Garmin device and Talon Ultra handlebars pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eThis MagCAD mount is designed to fully integrate with the MOst Talon Ultra handlebars fitted to the Dogma F12 and the MOst Talon UItra Light handlebars fitted to the Dogma F (2021-2024). It minimises aerodynamic drag whilst keeping your GPS device secure and close to your handlebars.\u003c\/p\u003e\n\u003cp\u003ePlease note this mount is not compatible with the newer MOst Talon Ultra Fast handlebars found on the Dogma F (2025-). For the MOst Talon Ultra Fast handlebars you will want our \u003ca href=\"https:\/\/www.magcad-designs.com\/products\/magcad-garmin-most-talon-ultra-fast-mount\" title=\"MagCAD Garmin MOst Talon Ultra Fast Mount\"\u003eMagCAD Garmin MOst Talon Ultra Fast Mount\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThis MagCAD mount is designed to suit Garmin Edge devices up to the size of the 540\/840. For the largest Garmin Edge devices such as the 1040 and 1050 see our \u003ca title=\"MagCAD Garmin 1050 MOst Talon Ultra Mount\" href=\"https:\/\/www.magcad-designs.com\/products\/magcad-garmin-1050-most-talon-ultra-mount\"\u003eMagCAD Garmin 1050 MOst Talon Ultra Mount\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attach to the underside of your MOst Talon Ultra handlebars with two M5 x 25mm button head screws, provided. These are longer than will have been supplied with your Talon Ultra handlebars. We recommend using a thread locking compound like Loctite to secure the screws and avoid overtightening.\u003c\/p\u003e\n\u003cp\u003eAll Garmin Edge devices come with a lanyard for extra security. We recommend using this lanyard alongside our MagCAD mount to avoid any risk of damage due to incorrect assembly or mis-use.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eGarmin Edge devices (small\/medium): 130 Plus, 530, 540, 830, 840.\u003c\/li\u003e\n\u003cli\u003eMOst Talon Ultra handlebars (Dogma F12).\u003c\/li\u003e\n\u003cli\u003eMOst Talon Ultra Light handlebars (Dogma F 2021-2024).\u003c\/li\u003e\n\u003cli\u003eNot compatible with the MOst Talon Ultra Fast Handlebars (Dogma F 2025-).\u003c\/li\u003e\n\u003cli\u003eNot compatible with the MOst Talon handlebars (Dogma 2, Dogma 65.1).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 32 grams (without hardware), 40 grams (with hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Cicli Pinarello S.p.A or their products and services. Pinarello and their respective logos are trademarks or registered trademarks of Cicli Pinarello S.p.A.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39771457978422,"sku":"106610","price":31.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39771458011190,"sku":"106611","price":31.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39771458043958,"sku":"106612","price":31.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39771458076726,"sku":"106613","price":31.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39771458109494,"sku":"106615","price":31.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_4947.jpg?v=1644582058"},{"product_id":"magcad-wahoo-elemnt-bolt-most-talon-ultra-mount","title":"MagCAD Wahoo Elemnt Bolt MOst Talon Ultra Mount","description":"\u003cp\u003eMount your Wahoo Elemnt Bolt (V1) computer in front of your MOst Talon Ultra handlebars with this MagCAD Mount.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount, 2x M5x25mm button head screws.\u003c\/p\u003e\n\u003cp\u003eThe Wahoo device and Talon Ultra handlebars pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eThe MOst Talon Ultra handlebars are a one-piece carbon handlebar and stem fitted to the Pinarello Dogma F12 bike. The MagCAD Talon Ultra mount is designed to fully integrate with these handlebars, minimising aerodynamic drag and providing a secure mount for your GPS computer. The MOst Talon Ultra handlebars have two M5 inserts on the underside, left and right of the stem, for a computer mount to attach to. We have a different version mount for the older Talon handlebars, which have two M5 inserts inline with the stem.\u003c\/p\u003e\n\u003cp\u003eThe MagCAD Wahoo Elemnt Bolt MOst Talon Ultra Mount is designed specifically for the shape of the Bolt (V1). It is extremely strong and stiff, keeping your device securely positioned in front of your stem.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attach to the underside of your MOst Talon Ultra handlebars with two M5 x 25mm button head screws, provided. These are longer than will have been supplied with your Talon Ultra handlebars. We recommend using a thread locking compound like Loctite to secure the screws and avoid overtightening.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt Bolt (V1) - Sold between March 2017 - April 2021.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 26 grams (without hardware).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39771484127286,"sku":"106310","price":31.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39771484160054,"sku":"106311","price":31.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39771484192822,"sku":"106312","price":31.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39771484225590,"sku":"106313","price":31.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39771484258358,"sku":"106315","price":31.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_6333.jpg?v=1643721066"},{"product_id":"magcad-wahoo-elemnt-bolt-v2-most-talon-ultra-mount","title":"MagCAD Wahoo Elemnt Bolt V2 MOst Talon Ultra Mount","description":"\u003cp\u003eMount your Wahoo Elemnt Bolt (V2) computer in front of your MOst Talon Ultra and Ultra Light cockpit with this MagCAD Mount.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed mount.\u003c\/li\u003e\n\u003cli\u003e2x M5x25mm button head screws.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Wahoo device and Talon Ultra handlebars pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eThe MOst Talon Ultra cockpit is a one-piece carbon handlebar and stem first fitted to the Pinarello Dogma F12 bike and updated to the Ultra Light with the launch of the Dogma F (2021-2024). The MagCAD Talon Ultra mount is designed to fully integrate with both these cockpits, minimising aerodynamic drag and providing a secure mount for your GPS computer.\u003c\/p\u003e\n\u003cp\u003eThe MOst Talon Ultra and Ultra Light cockpits have two M5 inserts on the underside, left and right of the stem, for a computer mount to attach to. We have a different version mount for the older Talon handlebars, which have two M5 inserts inline with the stem, and a different mount again for the newer Ultra Fast cockpit on the Dogma F (2025-).\u003c\/p\u003e\n\u003cp\u003eThe MagCAD Wahoo Elemnt Bolt V2 MOst Talon Ultra Mount is designed specifically for the shape of the Bolt (V2). It is extremely strong and stiff, keeping your device securely positioned in front of your stem.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attach to the underside of your MOst Talon Ultra handlebars with two M5 x 25mm button head screws, provided. These are longer than will have been supplied with your Talon Ultra handlebars. We recommend using a thread locking compound like Loctite to secure the screws and avoid overtightening.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt Bolt (V2) - New for May 2021, featuring a colour screen and slightly larger size compared with the Bolt (V1).\u003c\/li\u003e\n\u003cli\u003eNot compatible with the original Bolt (V1) or the new Bolt (V3).\u003c\/li\u003e\n\u003cli\u003eMOst Talon Ultra cockpit (Dogma F12).\u003c\/li\u003e\n\u003cli\u003eMOst Talon Ultra Light cockpit (Dogma F 2021-2024).\u003c\/li\u003e\n\u003cli\u003eNot compatible with the MOst Talon Ultra Fast cockpit (Dogma F 2025-).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 26 grams (without hardware), 34 grams (with hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Cicli Pinarello S.p.A, Wahoo Fitness, or their products and services. Pinarello, Wahoo, and their respective logos are trademarks or registered trademarks of Cicli Pinarello S.p.A and Wahoo Fitness.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39771486584886,"sku":"106410","price":32.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39771486617654,"sku":"106411","price":32.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39771486650422,"sku":"106412","price":32.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39771486715958,"sku":"106413","price":32.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39771486748726,"sku":"106415","price":32.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_4897.jpg?v=1643721782"},{"product_id":"magcad-garmin-integrated-mount","title":"MagCAD Garmin Integrated Mount","description":"\u003cp\u003eA Garmin Edge computer mount for integrated handlebars with two bolt fixings, such as the MOst Talon and Canyon H31 handlebars.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount, 2x M5x20mm button head hex screws.\u003c\/p\u003e\n\u003cp\u003eThe Garmin device and Most Talon handlebars pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eThis MagCAD mount fits various brands of integrated handlebars with two bolt fixings underneath. It's primarily designed for the MOst Talon handlebars from Pinarello, which have two M5 threaded inserts on the underside of the stem, but it will fit other handlebars such as the Canyon H31 integrated cockpit and Ribble Level 5 handlebars.\u003c\/p\u003e\n\u003cp\u003eThis MagCAD mount is designed to suit Garmin Edge devices up to the size of the 830. It is extremely strong and stiff, keeping your device securely positioned in front of your stem. It wont suit the largest Garmin 1030 device.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attached to the underside of your handlebars and adjust forward or backward to suit your exact installation before fully tightening.\u003c\/p\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eGarmin Edge devices (small\/medium): 130 Plus, 530, 830.\u003c\/li\u003e\n\u003cli\u003eMOst Talon handlebars - Not the newer Talon Ultra handlebars.\u003c\/li\u003e\n\u003cli\u003eCanyon H31 cockpit - Not the Canyon H11\/H36 handlebars.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 25 grams (not including hardware).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39772503441462,"sku":"100810","price":27.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39772503474230,"sku":"100811","price":27.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39772503506998,"sku":"100812","price":27.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39772503539766,"sku":"100813","price":27.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39772503572534,"sku":"100815","price":27.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_8893.jpg?v=1668434172"},{"product_id":"magcad-wahoo-elemnt-bolt-v2-integrated-mount","title":"MagCAD Wahoo Elemnt Bolt V2 Integrated Mount","description":"\u003cp\u003eA Wahoo Elemnt Bolt (V2) computer mount for integrated handlebars with two bolt fixings, such as the MOst Talon and Canyon H31 handlebars.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount, 2x M5x20mm button head hex screws.\u003c\/p\u003e\n\u003cp\u003eThe Wahoo device and Most Talon handlebars pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eThis MagCAD mount fits various brands of integrated handlebars with two bolt fixings underneath. It's primarily designed for the MOst Talon handlebars from Pinarello, which have two M5 threaded inserts on the underside of the stem, but it will fit other handlebars such as the Canyon H31 integrated cockpit.\u003c\/p\u003e\n\u003cp\u003eThe MagCAD Wahoo Elemnt Bolt V2 Integrated Mount is designed specifically for the shape of the Bolt (V2). It is extremely strong and stiff, keeping your device securely positioned in front of your stem.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attached to the underside of your handlebars and adjust forward or backward to suit your exact installation before fully tightening.\u003c\/p\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt Bolt (V2) - New for May 2021, featuring a colour screen and slightly larger size compared with the Bolt (V1).\u003c\/li\u003e\n\u003cli\u003eMOst Talon handlebars - Not the newer Talon Ultra handlebars.\u003c\/li\u003e\n\u003cli\u003eCanyon H31 cockpit - Not the Canyon H11\/H36 handlebars.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 24 grams (not including hardware).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39775191564342,"sku":"106510","price":27.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39775191597110,"sku":"106511","price":27.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39775191629878,"sku":"106512","price":27.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39775191662646,"sku":"106513","price":27.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39775191695414,"sku":"106515","price":27.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_8286.jpg?v=1659447198"},{"product_id":"magcad-wahoo-elemnt-roam-integrated-mount","title":"MagCAD Wahoo Elemnt Roam Integrated Mount","description":"\u003cp\u003eA Wahoo Elemnt Roam V1 and V2 computer mount for integrated handlebars with two bolt fixings, such as the MOst Talon and Canyon H31 handlebars.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount, 2x M5x20mm button head hex screws.\u003c\/p\u003e\n\u003cp\u003eThe Wahoo device and Most Talon handlebars pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eThis MagCAD mount fits various brands of integrated handlebars with two bolt fixings underneath. It's primarily designed for the MOst Talon handlebars from Pinarello, which have two M5 threaded inserts on the underside of the stem, but it will fit other handlebars such as the Canyon H31 integrated cockpit.\u003c\/p\u003e\n\u003cp\u003eThe MagCAD Wahoo Elemnt Roam Integrated Mount is designed specifically for the shape of the Roam. It is extremely strong and stiff, keeping your device securely positioned in front of your stem.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attached to the underside of your handlebars and adjust forward or backward to suit your exact installation before fully tightening.\u003c\/p\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt Roam V1 and V2.\u003c\/li\u003e\n\u003cli\u003eMOst Talon handlebars - Not the newer Talon Ultra handlebars.\u003c\/li\u003e\n\u003cli\u003eCanyon H31 cockpit - Not the Canyon H11\/H36 handlebars.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 30 grams (not including hardware).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39776166543414,"sku":"103710","price":31.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39776166576182,"sku":"103711","price":31.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39776166608950,"sku":"103712","price":31.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39776166641718,"sku":"103713","price":31.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39776166674486,"sku":"103715","price":31.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_7167.jpg?v=1650551084"},{"product_id":"magcad-wahoo-elemnt-bolt-integrated-mount","title":"MagCAD Wahoo Elemnt Bolt Integrated Mount","description":"\u003cp\u003eA Wahoo Elemnt Bolt (V1) computer mount for integrated handlebars with two bolt fixings, such as the MOst Talon and Canyon H31 handlebars.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount, 2x M5x20mm button head hex screws.\u003c\/p\u003e\n\u003cp\u003eThe Wahoo device and Most Talon handlebars pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eThis MagCAD mount fits various brands of integrated handlebars with two bolt fixings underneath. It's primarily designed for the MOst Talon handlebars from Pinarello, which have two M5 threaded inserts on the underside of the stem, but it will fit other handlebars such as the Canyon H31 integrated cockpit.\u003c\/p\u003e\n\u003cp\u003eThe MagCAD Wahoo Elemnt Bolt Integrated Mount is designed specifically for the shape of the Bolt (V1). It is extremely strong and stiff, keeping your device securely positioned in front of your stem.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eSimply attached to the underside of your handlebars and adjust forward or backward to suit your exact installation before fully tightening.\u003c\/p\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt Bolt (V1) - Sold between March 2017 - April 2021.\u003c\/li\u003e\n\u003cli\u003eMOst Talon handlebars - Not the newer Talon Ultra handlebars.\u003c\/li\u003e\n\u003cli\u003eCanyon H31 cockpit - Not the Canyon H11\/H36 handlebars.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 23 grams (not including hardware).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39776670810166,"sku":"101510","price":25.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39776670842934,"sku":"101511","price":25.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39776670875702,"sku":"101512","price":25.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39776670908470,"sku":"101513","price":25.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39776670941238,"sku":"101515","price":25.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/WahooElemntBoltIntegratedHandlebarMountv3Black161121_3.jpg?v=1637083809"},{"product_id":"magcad-garmin-direct-mount","title":"MagCAD Garmin Direct Mount","description":"\u003cp\u003eA Garmin Edge computer mount that attaches to the faceplate of compatible direct mount stems such as Fizik, Cervelo and 3T.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e1x 3D printed mount, 1x M5x16mm cap screw, 1x M5 tee nut.\u003c\/p\u003e\n\u003cp\u003eThe Garmin device and stem pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Garmin device neatly in front of your handlebars and compatible direct mount stem. The Fizik stem pictured has a specially design slot in the faceplate that allows a tee nut to sit inside, providing a secure point to attach a computer mount.\u003c\/p\u003e\n\u003cp\u003eThis MagCAD mount is designed to suit Garmin Edge devices up to the size of the 830. It is extremely strong and stiff, keeping your device securely positioned in front of your stem. There is a longer version of this mount designed specifically for the Garmin 1030.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eFitting the MagCAD mount is a simple process. Should you require any further clarification to the below please get in contact.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the faceplate from your stem.\u003c\/li\u003e\n\u003cli\u003eInsert the tee nut into the back of the faceplate.\u003c\/li\u003e\n\u003cli\u003eBolt the mount through the faceplate and into the tee nut and loosely tighten.\u003c\/li\u003e\n\u003cli\u003ePivot the mount to the centre of the slot and fully tighten.\u003c\/li\u003e\n\u003cli\u003eCheck the mounting bolt is long enough to fully engage with the tee nut but not too long to protrude past the tee nut and foul your handlebars.\u003c\/li\u003e\n\u003cli\u003eReassemble the faceplate to your stem following the stem manufacturers instructions.\u003c\/li\u003e\n\u003cli\u003eLoosen the mount and pivot to your preferred orientation before retightening.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003e\u003cbr\u003e\u003c\/h5\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cp\u003eThe MagCAD Direct Mount is compatible with a number of stems. Listed below are those with which the fit and function has been confirmed and we will continue to add more as soon as we come across them. You're more than welcome to try with other stems and send us feedback.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFizik Cyrano stems.\u003c\/li\u003e\n\u003cli\u003eCervelo Carbon C026 and Aluminium A027 stems.\u003c\/li\u003e\n\u003cli\u003e3T Apto Team stems.\u003c\/li\u003e\n\u003cli\u003eFelt AR Integrated stem.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompatible with the below GPS computers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGarmin Edge devices (small\/medium): 130 Plus, 530, 830.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 12 grams (not including hardware), 16 grams (including hardware).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39776949141558,"sku":"105310","price":19.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39776949174326,"sku":"105311","price":19.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39776949207094,"sku":"105312","price":19.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39776949239862,"sku":"105313","price":19.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39776949272630,"sku":"105315","price":19.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_4413.jpg?v=1637094285"},{"product_id":"magcad-wahoo-elemnt-bolt-direct-mount","title":"MagCAD Wahoo Elemnt Bolt Direct Mount","description":"\u003cp\u003eA Wahoo Elemnt Bolt (V1) computer mount that attaches to the faceplate of compatible direct mount stems such as Fizik, Cervelo and 3T.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed mount.\u003c\/li\u003e\n\u003cli\u003e1x M5x16mm cap screw.\u003c\/li\u003e\n\u003cli\u003e1x M5 curved tee nut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Wahoo device and stem pictured are for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eMount your Wahoo Elemnt Bolt (V1) neatly in front of your handlebars and compatible direct mount stem. The Fizik stem pictured has a specially design slot in the faceplate that allows a tee nut to sit inside, providing a secure point to attach a computer mount.\u003c\/p\u003e\n\u003cp\u003eThe MagCAD Wahoo Elemnt Bolt Direct Mount is designed specifically for the shape of the Bolt (V1). It is extremely strong and stiff, keeping your device securely positioned in front of your stem.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eFitting the MagCAD mount is a simple process. Should you require any further clarification to the below please get in contact.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the faceplate from your stem.\u003c\/li\u003e\n\u003cli\u003eInsert the tee nut into the back of the faceplate.\u003c\/li\u003e\n\u003cli\u003eBolt the mount through the faceplate and into the tee nut and loosely tighten.\u003c\/li\u003e\n\u003cli\u003ePivot the mount to the centre of the slot and fully tighten.\u003c\/li\u003e\n\u003cli\u003eCheck the mounting bolt is long enough to fully engage with the tee nut but not too long to protrude past the tee nut and foul your handlebars.\u003c\/li\u003e\n\u003cli\u003eReassemble the faceplate to your stem following the stem manufacturers instructions.\u003c\/li\u003e\n\u003cli\u003eLoosen the mount and pivot to your preferred orientation before retightening.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003e\u003cbr\u003e\u003c\/h5\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cp\u003eThe MagCAD Direct Mount is compatible with a number of stems. Listed below are those with which the fit and function has been confirmed and we will continue to add more as soon as we come across them. You're more than welcome to try with other stems and send us feedback.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFizik Cyrano stems.\u003c\/li\u003e\n\u003cli\u003eCervelo Carbon C026 and Aluminium A027 stems.\u003c\/li\u003e\n\u003cli\u003e3T Apto Team stems.\u003c\/li\u003e\n\u003cli\u003eFelt AR Integrated stem.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompatible with the below GPS computers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWahoo Elemnt Bolt (V1) - Sold between March 2017 - April 2021.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 10 grams (not including hardware).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":39777425621046,"sku":"105410","price":21.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39777425653814,"sku":"105411","price":21.99,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":39777425686582,"sku":"105412","price":21.99,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":39777425719350,"sku":"105413","price":21.99,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":39777425752118,"sku":"105415","price":21.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/products\/IMG_4443.jpg?v=1637145698"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/collections\/the-curve-in-the-road.jpg?v=1638541536","url":"https:\/\/www.magcad-designs.com\/collections\/all.oembed?page=15","provider":"MagCAD Designs","version":"1.0","type":"link"}