{"product_id":"magcad-garmin-varia-pearson-shift-seat-post-clamp-mount","title":"MagCAD Garmin Varia Pearson Shift Seat Post Clamp Mount","description":"\u003cp\u003eMount your Garmin Varia rear radar light to a compatible Pearson Shift seat post with this MagCAD mount, now supplied with black stainless steel fasteners.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3D printed mount.\u003c\/li\u003e\n\u003cli\u003e1x M4x30mm cap screw - black stainless steel.\u003c\/li\u003e\n\u003cli\u003e1x M4 dome Nyloc nut - black stainless steel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Garmin Varia and seat post are pictured for reference only and not included.\u003c\/p\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003eThis mount offers a really clean and secure solution for mounting your Garmin Varia to your Pearson Shift seat post. This design replaces the OEM Varia mount with rubber bands which would always tend to move or rotated whilst out riding.\u003c\/p\u003e\n\u003cp\u003eThis mount is compatible with the aero shaped seat posts found on the Pearson Shift 1.0 (2023-2024) and 2.0 (2025-). Feel free to get in contact for more details on compatibility.\u003c\/p\u003e\n\u003cp\u003ePlease note the Garmin interface on the Varia devices is the same as the Garmin Edge devices but rotated 90 degrees. Therefore if you mount a Garmin Edge cycle computer to this mount it may not be the correct orientation for your setup.\u003c\/p\u003e\n\u003cp\u003ePlease be aware, this MagCAD mount is compatible with Garmin Varia radar lights that use a plastic quarter-turn interface like the RearVue 820 and the RTL515\/516. It is not compatible with the Varia RCT715 radar\/camera which has a metal interface and locking arm on the mount itself.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eThis MagCAD mount will be 3D printed and supplied fully assembled with black stainless steel fasteners.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the M4 screw, supplied, and separate the two 3D printed components.\u003c\/li\u003e\n\u003cli\u003eSlot the horseshoe shaped component over the front of the seat post, noting the correct upward position and preventing the M4 Nyloc nut from falling out.\u003c\/li\u003e\n\u003cli\u003eLocate the Varia mount at the back of your seat post and re-install the M4 screw, loosely tightening.\u003c\/li\u003e\n\u003cli\u003eWhen assembled correctly the Varia interface should be vertical to the ground.\u003c\/li\u003e\n\u003cli\u003ePosition up or down your seat post to suit and tighten the M4 screw to 1Nm with a 3mm Allen key.\u003c\/li\u003e\n\u003cli\u003eInstall your Garmin Varia device in the normal quarter turn motion.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAll fasteners should be checked periodically to ensure they are still tight.\u003c\/p\u003e\n\u003ch5\u003eCompatible With:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eGarmin Varia radar devices with plastic quarter turn interface; RearVue 820, RTL515, RTL516 etc.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Varia RCT715 radar\/camera.\u003c\/li\u003e\n\u003cli\u003ePearson Shift 1.0 (2023-2024) and 2.0 (2025-) road bikes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 19 grams (without hardware), 24 grams (with hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDisclaimer\u003c\/h5\u003e\n\u003cp\u003eThis product and\/or service is not affiliated with, endorsed by or in any way associated with Pearson Bicycle Company Ltd, Garmin Ltd, or their products and services. Pearson Cycles, Garmin, and their respective logos are trademarks or registered trademarks of Pearson Bicycle Company Ltd and Garmin Ltd.\u003c\/p\u003e","brand":"MagCAD","offers":[{"title":"Black","offer_id":56560712941954,"sku":"138910","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0150\/6102\/files\/Garmin_Varia_Pearson_Shift_Seat_Post_Clamp_Mount_Black_010426_1.jpg?v=1776181521","url":"https:\/\/www.magcad-designs.com\/products\/magcad-garmin-varia-pearson-shift-seat-post-clamp-mount","provider":"MagCAD Designs","version":"1.0","type":"link"}