MagCAD Garmin Cervelo S5 Mount
A Garmin Edge computer mount for the third generation of Cervelo S5 aero road bikes (2019-2022), compatible with the AB08 handlebar and V-shaped stem.
Please be aware this mount is not suitable for the 2023 Cervelo S5 and HB14 handlebars.
What's Included
- 1x 3D printed mount.
- 2x M4x16mm button head hex screws.
The Garmin device and Cervelo AB08 handlebars pictured are for reference only and not included.
Overview
This MagCAD mount integrates fully with the Cervelo AB08 aero handlebars found on the third generation Cervelo S5 road bikes (2019-2022).
This short version mount is suitable for devices up to the Garmin 540 & 840. It will not fit the largest Garmin 1040 & 1050 devices.
The mount positions your device flush with the top of the handlebars, close to the leading edge, so as to keep the aerodynamic impact to a minimum. This version maintains the same pitch as your handlebar installation. If you would like your computer held at a different pitch feel free to get in contact and we can modify the design to suit.
Application
Fitting the MagCAD mount is a simple process. Simply screw the mount into the threaded inserts on the underside of your Cervelo handlebars and tighten to 2Nm (torque specified by Cervelo). We recommend using a thread locking compound before installing the screw and periodically check the screw remains tight and secure.
Compatible With:
- Garmin Edge devices (small/medium): 130 Plus, 530, 830.
- Cervelo AB08 aero handlebars.
- NOT compatible with the HB14 handlebars, Cervelo S5 (2023).
Specification
- Weight: 22 grams (not including hardware), 25 grams (including hardware).
Disclaimer
This product and/or service is not affiliated with, endorsed by or in any way associated with Cervelo Cycles Inc. or Garmin Ltd. Cervelo, Garmin and their respective logos are trademarks or registered trademarks of Cervelo Cycles Inc. and Garmin Ltd.