MagCAD Hammerhead Karoo 2 Roval Alpinist Mount
Mount your Hammerhead Karoo 2 in front of your Roval Alpinist integrated cockpit with this MagCAD Mount.
1x 3D printed mount, 1x M4x29mm cap screw.
The Hammerhead device and Roval handlebars pictured are for reference only and not included.
This mount is a slight variation of our very popular MagCAD Hammerhead Karoo 2 Specialized Mount. Our MagCAD Hammerhead Karoo 2 Specialized Mount is designed to fit a range of Specialized alloy stems as well as the Roval Alpinist cockpit. However, this mount is specific to the Roval Alpinist handlebars with a subtly modified contacting face and supplied with a longer cap screw.
Fitting the MagCAD mount is a simple process. Simply screw the mount into the threaded insert on the underside of your Roval Alpinist handlebars and tighten to 2.7Nm (torque specified by Specialized). We recommend using a thread locking compound before installing the screw and periodically check the screw remains tight and secure.
To attach your Hammerhead device simply follow the same procedure as with the OEM Hammerhead mount, pulling the device backward onto the mount with a slight twist to centre and locate it. You should here a positive click when the device is attached. We recommend using the tether that's supplied with your Hammerhead device just for extra security.
- Hammerhead Karoo 2.
- Roval Alpinist integrated cockpit.
- Weight: 17 grams (without hardware).