MagCAD Hammerhead Karoo 2 TT Mount - 22.2mm
- 1x 3D printed mount.
- 1x M3x14mm cap screw.
- 3x M3 locking nuts.
- 2x M3x10mm countersunk screws.
The Hammerhead device pictured is for reference only and not included.
A mount to hold your Hammerhead Karoo 2 in between your TT handlebar extensions, perfectly placed when racing against the clock in Time Trials or Triathlons.
Simply attach to your handlebar TT extensions and tighten the M3 cap screw, supplied. The clamp has been designed in such a way that you can wrap handlebar tape over the top afterwards should you want to position the mount right at the end of your extensions.
To attach your Hammerhead device simply follow the same procedure as with the OEM Hammerhead mount, pulling the device backward onto the mount with a slight twist to centre and locate it. You should here a positive click when the device is attached. We recommend using the tether that's supplied with your Hammerhead device just for extra security.
- Hammerhead Karoo 2.
- Weight: 17 grams (without hardware).