MagCAD Wahoo Elemnt Bolt / Roam V3 GoPro Specialized Mount

Mount your Wahoo Elemnt Bolt 3 or Roam 3 computer in front of a compatible Specialized stem with this MagCAD mount.

What's Included

• 1x 3D printed mount.
• 1x M4x20mm (titanium) cap screw.
• 1x M4 (stainless steel) retained nut.
• 1x M5x20mm (stainless steel) button head screw.
• 1x M5 (stainless steel) dome nut.

The Wahoo device and Specialized stem are pictured for reference only and not included.

Overview

Mount your Wahoo Elemnt Bolt 3 or Roam 3 computer in front of your Specialized stem with this MagCAD Mount. The new Specialized stems found on bikes such as the Venge, Roubaix, Tarmac and Diverge (as well as others) come with a slot in the centre that provides a secure point to attach the mount.

This mount is designed specifically for the shape of the Bolt 3 and Roam 3. It will not suit the older Wahoo V2 and V1 devices, nor will it fit the Wahoo Elemnt Ace.

A GoPro lug has been added underneath for maximum flexibility, allowing you to mount additional devices such as cameras and lights underneath your computer without cluttering the rest of your handlebars. This version mount has the GoPro lug positioned further back to improve mount strength and offer a better position for front lights.

Please note this mount will not fit the Roval Alpinist or Roval Rapide cockpit.

Application

Fitting the MagCAD mount is a simple process.

1. Remove your Specialized stem faceplate and insert the supplied retained nut in the back of the faceplate, holding it horizontally.
2. Screw the MagCAD mount through the front of the faceplate, through the slot and into the retained nut. We recommend using a thread locking compound before installing the screw. Loosely tighten the screw.
3. Reassemble the stem faceplate to your Specialized stem, carefully following the manufacturers instructions and ensure the retained nut and screw do not foul your handlebars.
4. Pivot the mount to your preferred orientation and tighten to 2.7Nm.
5. Periodically check the screw remains tight and secure.

All Wahoo V3 devices come with a lanyard for extra security. We recommend using this lanyard alongside our MagCAD mount to avoid any risk of damage due to incorrect assembly or mis-use.

This MagCAD mount is supplied with a titanium M4 screw to secure the mount to the handlebars, improving strength over the OEM Roval mount.

Please Note: When mounting multiple devices off one mount we recommend using a tether for each device just for extra security.

Compatible With:

• Wahoo Elemnt Bolt 3 and Roam 3 computers.
• Not compatible with the Wahoo V2 or V1 computers or Wahoo Elemnt Ace.
• Action cameras and lights with a GoPro type mount.
• Specialized stems: Venge, Tarmac, Future.
• Not compatible with the Roval Alpinist or Roval Rapide cockpit.

Specifications

• Weight: 26 grams (without hardware), 34 grams (with hardware).

Disclaimer

This product and/or service is not affiliated with, endorsed by or in any way associated with Specialized Bicycle Components Inc, Wahoo Fitness, LLC, GoPro Inc or their products and services. Specialized, Wahoo, GoPro and their respective logos are trademarks or registered trademarks of Specialized Bicycle Components Inc, Wahoo Fitness, LLC and GoPro Inc.